MT0501.OM O/M 8/13/02 10:35 AM Page 6
TV OPERATION
TO VIEW A CHANNEL
1
2 |
3 |
1 |
2 |
Make sure the EXT/BATT/ CHARGE switch is set properly (see page 5). Slide the TV/ OFF/RADIO switch to the TV position to turn the TV on.
Slide the BAND switch to the |
| Tune a desired TV station by | |
desired setting: |
| turning the TUNING control ❶ and | |
VL: | Channels |
| adjust the VOLUME control ❷ as |
VH | Channels |
| desired. |
UHF | Channels |
|
|
|
|
|
|
4 |
5 | 6 |
Adjust the rod antenna for best picture.
Adjust picture controls, as described below, for best picture.
Slide the TV/OFF/RADIO switch to the OFF position to turn the TV off.
NOTES:
•When you change channels, the telescopic antenna may have to be
•If reception is poor, even after adjusting telescopic antenna, use an external antenna. See page 5 for details.
PICTURE CONTROLS
1 |
If the picture moves up and down or rolls, rotate to adjust the verti- cal hold.
2 | 3 |
BRIGHTNESS: | CONTRAST: |
If the picture is too light or dark, | If the picture is too strong or too |
rotate to adjust the brightness. | weak, rotate to adjust the contrast |
| and clearly define the shades of |
| blacks, grays and whites. |
6