Troubleshooting (Cont)
PROBLEM
No sound
SOLUTION
-Check the speaker settings. Turn up the volume.
-Press MUTE on the remote control to turn off mute.
-Unplug the headphones.
Remote control doesn’t work
-Remove any obstacles between the remote and the TV.
-Use the remote control near the portable TV.
-Point the remote at the IR sensor on the TV.
-Replace the battery in the remote control.
The on screen menu disappears before I have time to select an item.
After performing a Autoscan, the TV did not find any TV channels so the Channel up and Down buttons do not function.
The OSD Duration may be set to low. Press the MENU button to access the Menu, Press the DOWN button to highlight “OSD Duration” and press ENTER to select this menu item.
Press the RIGHT arrow key to increase the OSD Duration. Possible values are: 5, 10, and 30 seconds.
Check and make sure the Antenna setting is set correctly in the channel setup menu. When an antenna is being used, the an- tenna setting should be set to Air. When a cable input is being used, the antenna setting should be set to CATV.
The descriptions and characteristics in this owner’s manual are for the purpose of general reference only and not as a guarantee. In order to provide you with the highest quality product, we may make changes or modifications without prior notice. The English version serves as the final reference on all product and operation details should any discrepancies arise in other languages.
18
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com