USING THE CASSETTE DECK
UNDERSTANDING THE BUTTONS
If you know what each button does, it’s easy to figure out how to operate the tape decks.
RECORD 
— Press to record from the radio, CDs, VIDEO 1, or VIDEO 2. You can only record on Deck 1.
PLAY 
— Press to play cassettes.
REWIND 
— From stop mode, press to rewind the tape toward the beginning.
FAST FORWARD 
— From stop mode, press to advance the tape toward the end.
STOP/EJECT 
— Press to stop current tape activity, or to open the cassette compartment door when no buttons are active.
PAUSE 
— Press to interrupt tape play or record. Press a second time to resume tape play or tape record mode.
PLAYING CASSETTE TAPES
You can play cassettes from either of the two tape decks.
1.Press TAPE function button to activate the cassette deck.
2.Press STOP/EJECT to open the cassette compartment door.
3.Insert a tape into the compartment door, and then close the door securely.
4.Press REWIND or FAST FORWARD to move tape to the desired starting point.
5.Press PLAY to begin playing the tape.
AUTOMATIC STOP FEATURE
When the tape deck is operating in any mode and the end of the tape is reached, the system automatically shuts itself off and returns all buttons to the off (up) position.
RECORDING FROM THE RADIO
1.Insert a cassette tape into Deck 1.
2.Choose the TUNER/BAND function and select a radio station.
3.Press RECORD to begin recording.
4.Press STOP/EJECT to end recording.
1 | 2 |
DECK | DECK |
| PHONES |
Erase Protection
When you record new material, the cassette deck records over whatever is on a tape. To protect a tape from accidental erasure, break off one or both plastic tabs (one for each tape side) on the top of the cassette tape. If you decide later to record on the tape, seal the hole with a piece of cellophane tape.
A
60 | A |
|
A | A |
14