FM/AM Tuner
FM/AM antenna
•For FM reception, uncoil the FM antenna at the back of the radio, ensuring it is fully extended (you may even want to tape it to the wall behind the radio if possible. The higher the better.)
•For AM reception, connect the AM antenna loop to the back of the radio. Rotate the AM loop antenna for better reception.
Accessing FM/AM Radio
•Press SOURCE repeatedly to select FM Tuner or AM Tuner.
OR
•Press 
or 
to highlight FM Tuner or AM Tuner in the Source menu and then press SELECT.
FM RADIO
92.3 MHz | |
ST | Stereo signal indicator |
Listening to FM/AM Radio
To select a station:
1.Press 
or 
to adjust the frequency.
2.Press and hold 
or 
until the radio beeps to start searching through the frequency range. The radio stops searching when it detects the next station.
To store the current station as a preset:
1.Select a station.
2.Press and hold 1, 2, 3, 4, 5 or 6 on top of the radio until a beep sound is heard to store the current station to that preset button.
•To listen to a preset station, press 1-6.
•To edit a preset station, repeat the steps above to overwrite the previously stored station.
•You can assign a preset station as the wake sound of the alarm, refer to page 17 for more information.
To assign the current station as the wake sound of the alarm clock:
1.Press 
.
2.Press 
or 
to highlight Send to Alarm and then press SELECT.
Recording FM/AM Radio
Warning! Use of the recording feature is for personal use only. (Files can not be transferred or moved from the internal memory.)
To record the current station:
1.Press 
to start recording.
FM RADIO
92.3 ST
MHz
REC 00:00:34
2. Press 
to stop recording.
•Recording will be stored in the internal memory of the radio.
•For playback, please refer to Internal Memory on page 24.
•The radio names each recording <Source><Station Frequency>_<Month_ Date>_<Time Stamp>.
For example: FM99.5_1_21_1245.
23