FCC Information RC107, Before you begin, Clock

]

Portable Cart Warning

v4.0 (1.0.4.0) (EN/F)

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE

FCC Information

user manual guide de l’utilisateur

RC107

prong. The wide blade or the third prong is provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being

walked on or pinched particularly at

plugs, convenience receptacles, and

the point where they exit from the

apparatus.

• Only use attachments/accessories

not operate normally, or has been dropped.

ADDITIONAL SAFETY INFORMATION

• The AC/AC adapter supplied with

this product is intended to be

correctly oriented in a vertical or

ﬂoor mount position.

• Do not use unauthorized chargers

or power adapters. Use only

chargers or power adapters that

came with your product or that is

• AC/AC adapter is a disconnect

device. The AC/AC adapter should

not be obstructed OR should be

easily accessed during intended use.

• The ventilation should not be

impeded by covering the ventilation

openings with items such as

newspaper, table-cloths, curtains etc.

• No naked ﬂame sources, such as

lighted candled, should be placed

on the apparatus.

• Attention should be drawn to the

battery immediately. They may cause skin burns or other personal injury.

• Please help to protect the environment by recycling or disposing of batteries according to federal, state, and local regulations.

WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, ﬁre or the like.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

EN/F

It is important to read this user manual prior to using your new product for the ﬁrst time. Nous vous recommandons de lire ce manuel d’instructions avant d’utiliser votre nouveau produit pour la première fois.

Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use.

•Read these instructions.

•Keep these instructions.

•Heed all warnings.

•Follow all instructions.

•Do not use this apparatus near water.

•Clean only with dry cloth.

•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding

speciﬁed by the manufacturer.

• Use only with

the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer,

or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

•Unplug this apparatus during lightning storms or when unused for long periods of time.

•Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does

listed in the user’s guide.

• Apparatus shall not be exposed to

dripping or splashing and no objects

ﬁlled with liquids, such as vases,

shall be placed on the apparatus.

• Always leave sufﬁcient space around

the product for ventilation. Do

not place product in or on a bed,

rug, in a bookcase or cabinet that

may prevent air ﬂow through vent

openings.

• Do not place lighted candles,

cigarettes, cigars, etc. on the

product.

• Care should be taken so that objects

do not fall into the product.

• Do not attempt to disassemble

the cabinet. This product does

not contain customer serviceable

components.

• The marking information is located

at the bottom of apparatus.

• To be completely disconnect the

power input, the AC/AC adapter

of apparatus shall be disconnected

from the mains.

environmental aspects of battery

disposal.

• The use of apparatus in moderate

climates.

Important battery precautions

•Any battery may present a risk of ﬁre, explosion, or chemical burn if abused. Do not try to charge a battery that is not intended to be recharged, do not incinerate, and do not puncture.

•Non-rechargeable batteries, such as alkaline batteries, may leak if left in your product for a long period of time. Remove the batteries from the product if you are not going to use it for a month or more.

•If your product uses more than one battery, do not mix types and make sure they are inserted correctly.

Mixing types or inserting incorrectly may cause them to leak.

•Discard any leaky or deformed

Ecology

Help protect the environment - we recommend that you dispose of used batteries by putting them into specially designed receptacles.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an

experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by Audiovox could void the user’s authority to operate the equipment.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Electrical power information

Before you begin

Plugging in for power

•Connect the supplied power adapter to the unit’s AC IN jack at the back, and connect to a convenient wall outlet.

•Refer to the “Clock” section and follow the instructions to set the clock.

the door out and off the cabinet.

2.Connect a 9-volt alkaline battery (not included) to the connector plug.

3.Replace the compartment door.

Power failure indicator

When AC power is interrupted (disconnected) for a short period of time, both time and alarm settings

General controls

Right view

Left view

• – VOLUME + – To adjust volume

• TUNING – To adjust radio frequency

•USB Charging – To charge your cell phones via this USB connector

Clock

To set the clock:

1.Slide the / WAKE 1 / WAKE 2 / switch to to enter the clock setting mode.

2.Press or to set the time.

•Press and hold to decrease or increase the time value quickly.

•The “:” ﬂashes on the display in clock setting mode.

AC/AC adapter power supply: 120 V ~ 60 Hz

AC output: 10.5V @ 1 A

Battery back-up operation

• This clock radio is equipped with

a timekeeping system that can be

will be lost (unless batteries are installed). After AC power is restored (reconnected), the Digital Display

Top view

• ON/OFF – To turn radio on or off;

Display

3. Slide the	/ WAKE 1 / WAKE 2 /
switch to .

powered with a 9-volt alkaline

battery (not included). The power

failure protection circuit will not

operate unless battery is installed.

• When normal household power

is interrupted, or AC line cord

is unplugged, the batteries will

power the clock radio to keep

track of time and alarm settings

programmed into memory.

• When the battery backup functions,

the digital display will not light,

however, the function of alarm

still occurs during the power

interruption if remaining battery

power is adequate.

• Normal operation will resume after

AC power is restored so you will not

have to reset the time or the alarm.

To install the battery:

1.Remove battery compartment door (located at the bottom of the radio) by applying thumb pressure to the tab on battery door and then lift

will blink to indicate that power was interrupted and you should re-adjust the time and alarm settings.

Alkaline (NEDA 1604A/ IEC 6LR61) battery is recommended. Carbon-zinc battery may be used but memory holding time will be substantially reduced. Memory holding time for a fresh alkaline battery is approximately 8 hours (if alarm

is not operated) which should take care of short, nuisance-type AC power failures. To preserve battery life, the unit should remain plugged into an AC outlet. As the battery gets older, its voltage drops and memory may be lost. Be sure to replace the battery periodically. Battery should be removed if the unit will be stored for more than one month. Leaky battery can badly damage the clock radio.

	cancel the wake function.
•	/ WAKE 1 / WAKE 2 /			– To
	select setting mode (		: lock
	mode, WAKE 1 / WAKE 2 : wake
	setting mode,	: clock setting			Indicator
	mode)				Indicator
	mode)

•SNOOZE/SLEEP OFF – To quiet the wake alarm or wake radio temporarily (default: 9 minutes); cancel the sleep function

• – To decrease value when setting clock, wake, snooze and sleep modes.

• – To increase value when setting clock, wake, snooze and sleep modes.

•WAKE 1 MODE – To activate the Wake 1 settings; change wake 1 mode (radio/alarm).

•WAKE 2 MODE – To activate the Wake 2 settings; change wake 2 mode (radio/alarm).

•SLEEP – To activate the sleep function

•AM/FM – To select radio band

•AM – AM time

• 1 – Wake time 1 to alarm

• 1 – Wake time 1 to radio

• 2 – Wake time 2 to alarm

• 2 – Wake time 2 to radio

• The clock is in 12 hour format. The AM indicator lights to show AM time.

•The clock time blinks

if it is not set or after power interruption (without back-up battery installed).