Chapter 4
Using the Time Search Feature
You can use the Time Search feature to begin playback from any point on the disc (in the currently playing title) by entering the elapsed time. For example, if you have a favorite scene that begins 12:34 minutes into the movie, you can go directly to that point in the title.
1.Press the TIME SEARCH button on the remote (the time search prompt will be displayed).
2.Enter the elapsed time where you want to begin playback. As soon as you enter the last number, playback will begin from the time that you specified.
Note: This feature does not work in Playback Control mode.
Use
A•B Repeat
1.At the start of the segment you want to repeat, Press the
2.Allow the movie to play to the end of the segment you want to mark. You must let the movie play in standard playback mode to set the B point in
3.Press
4.The segment that you set plays until you turn
40 | chapter 4 |