RCA user manual Safety Precautions DRC6309, Accessories, Control Reference Guide, Power Supply

15 11.

12 10.

13

14

Important Safety Instructions

Safety Precautions

user manual

DRC6309

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block the ventilation openings. Install in accordance with the manufacturer's instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of a polarized or grounding - type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience

Safety Precautions

receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with a cart, stand, t r i p o d, b r a c k e t , o r t a b l e

specified by the manufacturer, or sold with the apparatus. W h e n a c a r t i s u s e d, u s e caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the AC power cord or plug is damaged, liquid has spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.

This product contains a low power laser device.

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

On Placement

• Do not use the unit in places that are extremely hot, cold, dusty, or humid.

• Place the unit on a flat and even surface.

• Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth,

or by placing it on carpeting.

• To avoid magnetizing, do not place the unit near speakers or magnets.

• Do not use this unit in direct sunlight or leave the unit in a closed automobile (or similar environments)

Ventilation Warning

•Do not block the ventilation openings or holes. If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.

•Do not operate the unit in a confined space, such as a bookcase or built-in cabinet. Allow about 4 inches (10cm) of free space all around the unit for adequate ventilation.

Rating Plate Location

•The rating plate is located on the bottom of unit.

FCC Statements

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

AVC Multimedia,

Markham, Ontario, L3R 1E3

http: //www.RCAav.com

Read these instructions before using your new product for the first time.

Disc Formats

The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous

voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock.

	The exclamation point within the
	equilateral triangle is intended to alert
	the user to the presence of important
	operating and maintenance (servicing)
* SEE BOTTOM OF UNIT FOR GRAPHIC SYMBOLS *
	instructions in this owner’s manual.

WARNING: Should any trouble occur, disconnect the AC power adapter and refer servicing to a qualified technician.

E - 1

Accessories

	where it would be exposed to high temperatures above 104°F (40°C).
•	No naked flame sources such as lighted candles should be placed on the AC power adapter or the main unit.
•	The apparatus should not be exposed to splashing or dripping liquids, and no objects filled with liquids,
	such as vases, should be placed on apparatus.

On Safety

•When connecting or disconnecting the AC power adapter, grip the plug and not the cord itself. Pulling the cord may damage it and create a hazard.

•When you are not going to use the unit for a long period of time, disconnect the AC power adapter.

On Condensation

•When left in a heated room where it is warm and damp, water droplets or condensation may form inside the unit. When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1 to 2 hours before turning the power on, or gradually heat the room and allow the unit to dry before use.

E - 2

Control Reference Guide

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Notes on Copyright

It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted material without permission.

Apparatus Claims of U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132 and 5,583,936 licensed for limited viewing uses only.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

E - 3

The unit can play back	DVDs	Audio CDs
	[8cm/12cm disc]	[8cm/12cm disc]	Compatible

Region Management Information

Region Management Information: This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVDs. If the region number printed on the DVD does not correspond to the region number of this unit, it cannot play that disc.

The region number of this unit is 1.

Disc Function or Operation That is Not Available

When the symbol appears on the screen, it indicates the function or operation attempted is not available at that time. This occurs because the DVD manufacturer determines the specific functions of DVDs. Certain functions may not be available on some DVDs. Be sure to read the documentation provided with the DVD.

Icons Used on DVDs		Language selections for audio
Sample lcons		Language selections for subtitles
Note:
		Screen aspect ratio
When playing back a CD-G (Graphics) or CD
		Multiple camera angles
EXTRA disc, the audio portion will be played,
but the graphic images will not be shown.		Region code indicator
	1
Titles, Chapters and Tracks
• DVDs are divided into “titles” and “chapters”. If the disc				Title1			Title2
has more than one movie on it, each movie would be a
			Chapter1		Chapter2	Chapter3	Chapter1	Chapter2
separate “title”. “Chapters” are sections of titles.
• Audio CDs are divided into “tracks”. A “track” is usually
one song on an Audio CD.				Track1	Track2	Track3	Track4	Track5

Note: Numbers identify each title, chapter, and track on a disc. Most discs have these numbers recorded on them, but some do not.

Notes on Unauthorized Discs

You may not be able to play some DVDs on this unit, particularly if they were purchased from outside your geographic area or made for business purposes.

E - 4

Please check and identify the supplied accessories.
Remote Control (with battery)	x 1
AC Power Adapter	x 1
Car Power Adapter	x 1
Carrying Bag	x 1

Remote Control

Using the Remote Control
• Point the remote control at the REMOTE SENSOR located		Remove the
on the unit.
		PLASTIC sheet
• When using this unit in very bright light, the infrared
		before USING the
REMOTE SENSOR may not work properly.
		Remote Control.
To Change Remote Battery		Battery Replacement
1. Open the battery door.	2. Insert one CR2025 (3V)	When the battery becomes weak,
	size battery.	the operating distance of the remote
		control will be greatly reduced and you
		will need to replace the battery.

Note: If the remote control is not going to be used for a long time, remove the battery.

WARNING: Do not dispose of the battery in a fire or it may leak and/or explode.

WARNING: Batteries should not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

E - 5

Unit

1.LCD screen

2.DC IN 9V - 12V jack

3.AUDIO / VIDEO OUT jack

4. CHARGE / STANDBY / ON switch

5. VOLUME control Adjusts the volume.

6. Headphone jack

7. NEXT button

Press to advance titles / chapters / tracks.

PREV button

Press to go back to the previous titles / chapters

/ tracks.

PAUSE button

Press to pause playback of a disc. Each time you press the PAUSE button the picture advances

one frame on DVD. Press the	PLAY button to
resume playback.
PLAY button

Press to start or resume playback of a disc. STOP button

Press to stop playing a disc. SEARCH button

Press to perform fast forward playback.

SEARCH button

Press to perform fast reverse playback.

8.Disc Door

Push to close the disc door.

9.OPEN knob

Slide the open knob rightwards to open the disc door.

10.Remote sensor

Receives the remote control unit signals.

11.ON indicator

12.CHARGING indicator

Charge the rechargeable battery before using it for the first time. The normal charging time should be completed in approximately 4-5 hours. The charging light will go out when the battery becomes fully charged.

E - 6

Remote Control

1.VIDEO MODE button

	Adjust Brightness,			VIDEO
				MODE			MENU	9
			1
	Panel Display and		2	PREV		SEARCH	NEXT
								10
	Contrast of the LCD		3	GOTO		STOP	PAUSE
			4
	screen.							11
							PLAY
			5
2.	PREV button				ENTER
				MEMORY		ANGLE	DISPLAY
	Move back through		6	M
							AUDIO
	titles, chapters or				2	3
							SUBTITLE/
	tracks on a disc.						RETURN
			7	4	5	6
3.	/	S E A R C H		7	8	9	0
	buttons					SETUP
			8
	S E A R C H : F a s t
					A-B	DISC
						REPEAT

reverse playback.

S E A R C H : F a s t forward playback.

4.GOTO button

Skip directly to a location on a CD/DVD.

5.Cursor (, , , ) buttons

Move between selections on a menu screen and adjust certain settings.

ENTER button

Confirm selections on a menu screen.

6.MEMORY button

Set titles/chapters in a favorite order.

7.Number (0 - 9) buttons

Use when creating programs or locating a title/chapter/ track or specific time.

8.REPEAT A-B button

Perform point-to-point repeat playback on a DVD or CD. REPEAT DISC button

Repeat a DVD chapter or title. Repeat a CD track or the whole disc.

E - 7

SETUP button

In Stop Mode, press to display the unit’s SETUP menu.

9.MENU button

Enter and exit the main DVD menu.

NEXT button

Move forward through titles, chapters or tracks on a disc.

STOP button Stop playing a disc. PLAY button

Start or resume playback of a disc.

PAUSE button

Press once to pause playback . Press

subsequently to advance frame by frame on a DVD.

12.DISPLAY button

Show status information on the screen.

13.ANGLE button

Switch between multiple camera angles if applicable to the DVD.

14.AUDIO button

Select one of the audio sound tracks on a DVD (if more than one is available) or select the audio output mode on a CD.

15.SUBTITLE button

Select one of the subtitle languages programmed on a DVD (if available). RETURN button

Return to normal operation after using the SETUP menu of a DVD.

Power Supply

A. Using the AC Power Adapter

The supplied AC power	1
adapter operates on AC	To wall outlet
100-120V.

AC power adapter 2 To DC IN 9V Jack

Cautions:

•The AC power adapter included with this unit is for its use only. Do not use it with other equipment.

•When the unit is not going to be used for long time, disconnect the AC power adapter from the wall outlet.

•When the AC power adapter is plugged in, the apparatus is not completely disconnected from the main power supply, even when the power is turned off.

Warning:

The power adapter is used as a disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the power adapter should be disconnected from the outlet completely.

Cautions:

•Use the provided 12V car power adapter only. Use with other car power adapters could damage the unit.

•The 12V car power adapter included with this unit is for its use only. Do not use it with other equipment.

•In the interest of traffic safety, do not operate this unit or view videos while driving a vehicle.

•Make sure the unit is securely fastened to prevent it from falling or flying through the air in the event of an accident.

•When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may become hot due to poor contact. Be sure to clean the cigarette lighter socket before use.

•After use, disconnect the 12V car power adapter from both the unit and cigarette lighter socket.

C. Using the Built-in Battery

The unit has a built-in, non-replaceable, rechargeable battery. Charge the built-in battery before using it for the first time. The normal charging time should be completed within 4-5 hours. The charging light will go out when the built-in battery becomes fully charged.

To recharge the built-in battery

Warnings:

•The built-in battery can only be recharged when the unit is in CHARGE mode while using the AC power adapter.

•The built-in battery cannot be recharged when the unit is in ON mode.

•Do NOT recharge the built-in battery in a vehicle using the car power adapter.

•Batteries should not be exposed to excessive heat such as sunshine, fire or the like.

Notes:

•When the built-in battery power is low, "Battery Low" will display on the screen and the unit will stop playing.

•Recharge the built-in battery when you are ready to use it again.

•While using the built-in battery, the environmental temperature should be 41°F (5°C) to 95°F (35°C).

•To get the longest service life of the built-in battery, charge at indoor-temperature.

•The built-in battery in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat above 212oF (100oC), or incinerate.

•The unit should not be exposed to excessive heat such as sunshine, fire or the like.

•When discarding the unit, environmental problems must be considered and local rules or laws governing the disposal of such products must be strictly followed.

Connections

A. Connecting a TV

If your TV has audio/video inputs, you can connect the unit to your TV using standard Audio/Video cables.

TV

White Red Yellow White

To AUDIO / VIDEO OUT jacks	Red
Audio / Video cable
	Yellow
(not included)

Watching a DVD on your TV

1.Turn on the unit.

2.Turn on the TV and follow the instructions included with it to watch video from external sources.

B. Using the Car Power Adapter

The 12V car power adapter allows the unit to be used with vehicles that have a 12V, negative ground electrical system.

Warning:

Disconnect the car power adapter when not in use. Not for use in 24V vehicles.

1

To cigarette
lighter socket	2 To DC IN 9V Jack
Car power adapter

To AC power
1 outlet
AC power
adapter
To DC IN 9V
2 jack
		R e c h a rg i n g i s
		5 completed when
		charging light
Slide the switch	Charging	goes out
3 to CHARGE	4 light ON

Turning on the Unit

1.Slide the CHARGE / STANDBY / ON switch on the left side of the unit to the ON position.

2.The start-up picture will appear on the screen.

3.After use, slide the CHARGE / STANDBY / ON switch to the STANDBY (power off ) position.

B. Using Headphones/Earphones

•Turn down the volume before connecting, and then adjust

the level.

• When headphones/earphones are connected, no sound will be emitted from the unit's speaker.

Caution:

Avoid listening to sound at levels which may be harmful to your ears.

Headphones/Earphones

(3.5mm diameter plug)

E -8

E - 9

E - 10

E - 11