RCA X3000 manual Updating the Lyra Software, Connecting the Lyra Recorder to the Computer

Chapter 1: Before You Begin

Updating the Lyra Software

You can upgrade your Lyra Recorder by downloading the latest firmware from http://www.rca.com/digitalaudiodownloads.

To see what software version is currently on your Lyra Recorder, go to the About Lyra menu in the Setup menu. Go to page 22 for more details.

After you have downloaded the latest firmware, follow the steps on the website to update your Lyra.

Connecting the Lyra Recorder to the Computer

Important: In order to transfer secure music files using Windows XP to your Lyra Recorder, you must set the USB Protocol setting to MTP in the Setup menu before connecting your Lyra. The Lyra Recorder doesn’t support copy-protected content if you are using Windows 2000. See page 52 for more information.

Connect the Lyra Portable Multi-media Recorder to your computer with the mini USB cable provided. Turn on the unit by pressing the ON/OFF button. The Lyra Recorder will appear as a Removable Disk drive letter in My Computer (Windows Explorer).

USB PORT

COMPUTER

DIGITAL

If an SD/MMC memory card is properly inserted, an additional drive letter may also be accessed as a Removable Disk drive letter through Windows Explorer. The Lyra Recorder also functions as a high-speed SD/MMC card reader.

For information on disconnecting the USB cable, go to the end of this chapter.

Notes: It might take several seconds for the Lyra Recorder to be detected, especially in Windows 2000. Click Refresh in My Computer or Explorer to make sure the device has been detected.

The Lyra Recorder can transfer files at a high-speed mode of USB 2.0. This is up to 40 times faster than USB 1.1. If USB 2.0 port is available on your computer, use it to connect to your Lyra Recorder. The Lyra Recorder is still backward compatible with the older USB 1.1 ports; however, you won’t be able to take full advantage of the potential speed increase.

14 Chapter 1