Chapter 1: Before You Begin
LyraDJ
LyraDJ is software that can easily generate playlists for you, after analyzing the acoustic characteristics of your songs, the software will create sets of related content that you can listen to and enjoy.
Important Note:
1.LyraDJ will only work with mp3 files.
2.LyraDJ will only work with files that are on the Lyra Recorder.
3.LyraDJ will only work on files in a folder called Music.
4.LyraDJ will only work in MSC (Mass Storage Class) USB protocol mode. The Lyra Recorder’s default is set to MTP, so you’ll need to change the setting if you want to use LyraDJ. In the Setup menu, select USB Protocol and change the setting to MSC. Go to page 52 for more information on the USB protocols.
Multiple level sub folders under the Music folder are allowed and recommended for optimum device performance and ease of finding content. For example D:\Music\Artist1\Album1\Song1.mp3
1.Start LyraDJ.
2.The software will ask you to connect the Lyra Recorder to the computer via USB cable.
3.Click Analyze to start analyzing songs in the Lyra Recorder.
4.Make sure the Lyra Recorder has at least 64 songs or else the software will not be able to generate a playlist.
5.When the analysis is completed, the software will create playlists (the number of playlists created will vary, depending on the total number of songs stored in the Lyra Recorder), you can save these playlists into the Lyra Recorder.
6.Click Help at the top right corner for more information.
Chapter 1 | 15 |