Connecting to a Power Source | Samsung SL630 specs

Connecting to a Power Source

You should use the rechargeable battery BP70A supplied with the camera. Be sure to charge the battery before using the camera.

BP70A rechargeable battery Speciﬁcation

Model			BP70A
Type			Lithium lon
Capacity			740mAh
Voltage			3.7V
Charging time			Approximately 150 Minutes
Number of images and battery life: Using the BP70A

		Battery life /			Conditions
	Number of images				Conditions
	Number of images
					Using the fully charged battery,
					Default settings, Program mode,
	Approx. 100 MIN /				Shot to shot interval: 30Sec.
Still image	Approx. 100 MIN /			Changing the zoom position between
	Approx. 200 shots				the Wide and the Tele after every shot.
					Using the ﬂash on every second shot.
					Using the camera for 5 minutes and
					then powering it off for 1 minute.

					Using the fully charged battery
Movie	Approx. 80 MIN				640x480 image size
					30 fps frame rate

ÄThese ﬁgures are measured under Samsung’s standard conditions and shooting conditions and may vary depending on the user’s methods.

Important information about battery usage. When camera is not in use, turn off the power.

Please remove the battery if the camera will not be used for long periods. Batteries can lose power over time and are prone to leaking if kept inside the camera.

Low temperatures (below 0°C) can affect the performance of the battery and you may experience reduced battery life. Batteries will usually recover at normal temperatures.

During extended use of the camera, the camera body may become warm. This is perfectly normal.

If you connect the AC adapter to the USB cable, you can use it as an AC cable and recharge the spare battery with it.

- Using an AC cable

: Connect the AC adapter to the USB cable. It can be used as a power cable.

- Using a USB cable

: Remove the AC adapter.You can download stored images to your PC (p.94) or supply the power to your camera through the USB cable.

12

Image 13

Samsung SL630 manual Connecting to a Power Source, BP70A rechargeable battery Speciﬁcation

Contents

Page Getting to Know your camera InstructionsPage Contents Volume 077 Setting play interval 058 Setting up the Date / Time / Date type064 Playing back a voice memo 055 Language For Mac users For Windows users Package Contents System chartSold Separately Front & Top Identiﬁcation of features Back Memory card slot Bottom Function buttonButton Information / Up button Mode icon Self-timer lamp BP70A rechargeable battery Speciﬁcation Connecting to a Power SourceNumber of images and battery life Using the BP70A Charging LED Guideline of recharging the battery Battery Insert the battery as shownInserting the memory card Insert the memory card as shown Instructions on how to use the memory card About Camera can use SD/SDHC Memory Cards Description Icons LCD monitor indicator00001 000000 Use the up or down button to navigate through the menus How to use the menuUse the left or right button to select a sub menu Selecting modes How to use Smart Auto mode Starting the recording modeSelect Smart Auto mode by pressing the Mode or Smart button Press the Shutter button to capture an image Place NightsBacklight Portrait See p.37 for further details How to use the Program mode How to use the Scene modes Picture Recording the movie clip without sound How to use the Movie clip modeMovie clip size and type are listed below Movie clip ﬁle type AVI Mjpeg Button is released Pausing while recording a movie clip Successive RecordingPressing the shutter button down half way Power button Shutter button Movie Clip mode Pressing the shutter button downSmart button Digital zoom Wide Zoom W/T Lever Info Disp / Up button Mode Macro / Down button Selectable, Inﬁnity focus range Mode Available focusing method, by recording modeFocus lock Flash range Flash / Left buttonNormal Macro Auto macro Auto 0.8~3.0 ~2.0 ~0.8 Flash mode indicator Selecting the self-timer Self-timer / Right buttonButton until the desired mode indicator Use a tripod to prevent the camera from shaking Starting Motion TimerDo not move Taking an image after 2 sec Menu button When you press the Menu button, a menu related to eachOK button Available in the voice recording function Available mode How to Enable Functions Using the Menu ButtonThen press the OK button Photo Size / Movie Size ShootingQuality / Frame rate Exposure compensation IndicatorShooting menu to select EV For taking images outside Icon DescriptionFor taking images under a cloudy Overcast sky Normal Face DetectionSome conditions this function cannot work properly Or too bright Blink Detection Start ﬁlming by pressing the shutter button Auto Focus type Face ToneFace Retouch Metering Center-weightedMulti Exposure will be calculated Based on an average For general use Spot Photo Style Selector Drive mode Contrast You can change the contrast of the image Image AdjustSharpness Saturation You can change the saturation of the image OIS Optical image StabilizationSelect Saturation by pressing the Up/Down button Shutter button again Voice Memo Voice RecordingFile type *.wav Recording the movie clip without voice Setting movie recordingSound Off Smart mode display Smart modeSmart Auto mode Image & Full Status Frame Rate is enabled only in Smart Movie mode Starting Smart modeProgram mode Selecting modes See p.20 for further details How to use Smart Movie Clip mode Sound  Sound menu Display Setup menuAF sound Language Quick view Start up imageDisplay Brightness Display Save No* Settings will not be restored to their defaults SettingsFormatting a memory Initialization File name Setting up the Date / Time / Date typeTime Zone Imprinting the recording date Auto power offThere is an option to include Date & Time on still images Date Only the Date will be On* The AF lamp will light up in low light conditions Auto Focus lamp Selecting Video out typeOff The AF lamp will not light up in low light conditions USB sub menus Auto Automatically enables an Setting the USBWith a USB cable Automatically Playing back a still image Starting play modePlaying back a movie clip Quickly Playing back a recorded voice Movie clip capture function Playing back a voice memo Thumbnail º / Enlargement í Lever Play mode buttonSmart Album Press the Left/Right button to move to a desired image Recorded dates Details of Each CategoryColor Week Button. Press the OK button and a Image enlargementMessage will be displayed Select a desired sub menu by Voice file, or a movie clip Play & Pause / OK buttonTemporarily stops playback Resumes playback Delete Õ button Left / Right / Down / Menu buttonThis deletes images stored on the memory Next image Sub Menu Setting up the play back function using the LCD monitorAll 4X6 Size Menu Tab Main Menu Sub MenuLayout Menus are subject to change without prior notice Resize Edit You can rotate the stored images by various degrees Rotating an imageChanged image is saved as a new file name New file name Custom RGBPress the play back button and press the Menu button Select By pressing the Left Change the brightness by pressing the Left/Right button Brightness will be displayedWill be saved as a new file name Contrast control Noise effect Start the Multi Slide Show Starting the Multi Slide ShowSelecting Images Configure Multi Slide show effects Setting play interval Setting Background MusicSet the Multi Slide Show music Unique screen effects can be used for the Multi Slide Show Deleting images File OptionsProtecting images You can add your voice to a stored still image Voice memo Reset Cancel the print setup When the wide angle image is printed as a wide angle print Dpof Size secondary menu Cancel, 3X5, 4X6, 5X7 If No is selected Cancel the index print settingDisplay Right button again. Sub menu will Copy to Card No Cancels Copy to CardThen press the Right button PictBridge Printed with the printer’s default settingsPressing the OK button Currently displayed image will be PictBridge Picture Selection PictBridge Print Setting Areas exposed to dust and dirt PictBridge Reset Important notesWeather Sand can be particularly troublesome to cameras Do not attempt to disassemble or modify the camera Extremes in temperature may cause problemsSamsung cannot be held responsible for camera malfunctions Insert a charged battery or recharge the battery There is low battery capacityMemory card is locked Insert fresh battery p.15 Before contacting a service centerTurn the camera power on The battery is exhausted Please check the following Check the connection The camera is off Turn the camera on Specifications PictBridge SD card Up to 4GB guaranteed·Audio WAV Capacity 1GB Size Operating Temperature Power Source Rechargeable battery BP70ASales region ~ 40C For Windows users Transferring files to your computer for Windows Connect your camera to your PC with the USB cable Screen Click the pop-up message Remove the USB cable Click Using Intelli-studio Transferring files to your computer for Mac Power Mac G3 or laterFor Mac users Minimum 256MB RAM Turn on the camera Right-click on the entry with the question ? or exclamation Case 5 Are other USB cables connected to the PC? Samsung Eco-mark Model No FCC noticeAddress Telephone No SAMSUNG726-7864