Starting the Multi Slide Show ( 
)
Images can be displayed continuously at
You can view the Multi Slide Show by connecting the camera to an external monitor.
1.Press the play mode button and press the MENU button.
2.Press the Up / Down button and select the [Multi Slide Show] menu tab and press the OK button.
Start the Multi Slide Show
The Multi Slide Show can start only in the [Start] menu.
1.Use the Up / Down button to select the [Start] menu and press the Right button.
Selecting Images
You can select image to view |
|
|
| |
1. Use the Up / Down button to select the | Start |
|
| |
[Images] menu and press the Right | Images | All :All |
| |
button. |
| Interval | Date:1 sec |
|
| Music | :Off |
| |
2. Select a desired sub menu by pressing |
| Select |
| |
Effect | :Off |
| ||
the Up / Down button. |
| |||
|
|
| ||
[All] | : All images saved on the |
|
|
|
Back | Set | |||
|
|
| ||
| Memory are played back. Press the OK button to | |||
| save the configuration. |
|
|
|
[Date] | : Images taken in a specified date are played back. | |||
2.Select a desired sub menu by pressing the Up / Down button.
[Play] : The Multi Slide Show is closed after one cycle.
[Repeat] : The Slide show is repeated until cancelled.
Start | Play |
|
|
| |
Images | :All |
|
| Repeat |
|
Interval | :1 sec |
|
Music | :Off | |
Effect | :Off | |
|
|
|
Back | Set | |
Press the OK button to save the configuration. [Select] : Play only the selected images. The selected image
can be saved as [Select1], [Select2] and [Select3]. If you save the selected image with the [New Select] command, it will be saved as [Select1]. But when a new image is saved again using [New Select], the former image which had been saved as [Select1] will
3.Press the OK button and the slide show will be started.
-To pause the slide show while playing it back, press the OK button again.
-Pressing the OK button again will cause the Multi Slide Show restart.
-To stop playback of the Multi Slide Show, press the OK button, and then press the Left or Right button.
be saved as [Select2] automatically.You can change and cancel the images which were saved as [Select1], [Select2] and [Select3]. Press the Fn button to save the configuration.
3.Select [Play] or [Repeat] in the [Start] menu to start the multi slide show.
76
