Danby DMW162BL-OTR Important Safety Information, Read All Safety Information Before Using

IMPORTANT SAFETY INFORMATION

READ ALL SAFETY INFORMATION BEFORE USING

FOR YOUR SAFETY

PRECAUTIONS

TO AVOID

POSSIBLE

EXPOSURE

TO EXCESSIVE

MICROWAVE

ENERGY

For your safety the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury or

loss of life.

Do Not Attempt to operate this oven with the door open since open-door operation can result in harmful exposure to microwave energy. It is important

not to defeat or tamper with the safety interlocks.

Do Not Place any object between the oven front face and the door or allow

soil or cleaner residue to accumulate on sealing surfaces.

Do Not Operate the oven if it is damaged. It is particularly important that the oven door close properly and that there is no damage to the:

1 door (bent),

2 hinges and latches (broken or loosened),

3 door seals and sealing surfaces.

The Oven Should Not be adjusted or repaired by anyone except properly qualified service personnel.

FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT (U.S.A. ONLY)

This equipment generates and uses ISM frequencies and if not installed and used properly, that is in strict accordance with the manufacturer's instructions, may cause interference to radio and television reception. It has been type-tested and found to comply with limits for ISM Equipment pursuant to Part 18 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation.

However, there is no guarantee that interference will not occur in particular installations. If this equip- ment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following:

•Reorient the receiving antenna of radio or television.

•Relocate the microwave oven with respect to the receiver.

•Move the microwave oven away from the receiver.

•Plug the microwave into a different outlet so that microwave and receiver are on different branch circuits.

The Manufacturer is not responsible for any radio or TV interference caused by UNAUTHORIZED MODIFICATION to this microwave oven. It is the responsibility of the user to correct such interference.

2