26
Using Successive Recording
Steps from 1-2 are the same as those
for MOVIE CLIP mode.
3. Press the shutter button and movie
clips are recorded for as long as the
available recording time. Movie clips
will still be recorded if the shutter
button is released.
4. Press the OK button to pause recording.
5. Press the OK button again to resume the recording.
6. If you wish to stop recording, press the shutter button again.
This camera allows you to temporarily stop during unwanted
scenes, while recording a movie clip. Using this function, you can
record your favorite scenes into a movie clip without having to
create multiple movie clips.
Pausing while recording a movie clip (Successive Recording)
Starting the recording mode
Stop Pause
The available memory capacity may vary depending on shooting
conditions and camera settings.
When the Flash Off, Slow synchro mode or DUAL IS mode is
selected in a low lighting condition, the camera shake warning
indicator ( Ã ) may appear on the LCD monitor. In this case, use
a tripod, support the camera on a solid surface or change to fl ash
shot mode.
Shooting against the light
:Please do not take pictures against the
sun. Doing so may make the picture dark.
To take a picture against the light, please
use the [Backlight] in scene shooting mode
(see page 23), fi ll-in fl ash (see page 34),
spot metering (see page 45), exposure
compensation (see page 40) or ACB (see
page 45) function.
Avoid obstructing the lens or the fl ash when you capture an image.
Compose the image by using the LCD monitor.
Pressing the shutter button down half way.
Lightly press the shutter button to confi rm focus and fl ash battery
charge. Press the shutter button all way down to take the picture.
[Lightly press the shutter button] [Press the shutter button]
Things to Watch Out for When Taking Pictures