RCA RP-9328 Open/Close, Intro, Power, Play/Pause, Preset/Tune, Rec, Repeat, Rew, Seek/Scan

GENERAL CONTROLS

OPEN/CLOSE

This button allows you to open and close the CD compartment door.

INTRO

This feature allows you to listen to the first 10 seconds of each track on the disc in the play position.

POWER

This button allows you to turn the system on and off. When turned on, the system will default to the last active mode.

NOTE: You can also turn the system on by pressing any one of the function buttons.

PAUSE

This button, located below each tape deck, allows you to temporarily suspend tape activity.

PLAY/PAUSE

This button, located to the left of the display, controls CD activity. Press once to begin CD play, again to pause play and a third time to resume play.

PRESET/TUNE

This button is active only in the TUNER function. Press to toggle between Preset and Tune mode. Using the (>> or <<) buttons, scan through the preprogrammed frequencies or those on the active band to select the radio station you want to hear.

REC

This button is located below the left cassette door.

Press to record from CDs, other tapes, the radio or an auxiliary component.

REPEAT

In the CD mode, you can repeat an entire disc, a programmed list or a certain track.

REW

This button winds the tape back toward the beginning.

SEEK/SCAN

These features are active only in the TUNER function in the FM band. Press once to activate the Seek mode. The system will stop tuning on the next available FM frequency. Press and hold the button momentarily to activate the Scan mode. The system

will stop for approximately five seconds at each of the FM stations received until the button is pushed again.

SET/DEMO

This feature allows you to store preset radio stations or programmed track lists in the system’s memory. This works in both the CD and TUNER functions. It also allows you to set the clock and timer.

SHUFFLE

This feature allows automatic random play of all discs and all tracks.

STOP

This button, located to the left of the display, ends CD activity.

STOP/EJECT

On systems with mechanical cassette decks, this button is located below each cassette door for tape activity. Press to stop current tape activity, or to open the cassette compartment door when no buttons are active. There is also a STOP button located in the Master Controls to the left of the display that is active only in the CD function. Press once to end CD activity.

TRACK/SEARCH

These buttons are active in the TUNER and CD functions. In the CD function, they allow you to search through a track while it is playing or skip through the tracks of the current disc. In the TUNER function, they allow you to do a fast or slow search incrementally through the band or presets.

VOLUME

Use this dial to regulate the level of sound output from the system. Turn the dial to the left to lower sound output. A message will continually run across the display when the sound is muted. Turn the dial to the right to increase sound output. The volume indicator in the display will show the level of sound output from minimum to maximum.

10