RCA RP-9348 Using the System, Using the Tuner, Using the CD Player, Storing Stations in Memory

USING THE SYSTEM

USING THE TUNER

POWER								BASS BOOST
			CD	TAPE		TUNER	VIDEO 1•2
								V	O L U	M E
STOP
PLAY/
PAUSE
DEMO
SEEK/SCAN	PRESET TUNE	SHUFFLE	INTRO	REPEAT	ATS		EQ BAND CUSTOM	POP	JAZZ		ROCK
		FM STEREO					TIMER/CLOCK
										PHONES

TUNING RADIO STATIONS

•Press the TUNER function button. Press again to switch between AM and FM.

•Use the SEEK/SCAN button to find the stronger radio stations on the FM band in your listening area.

–Press and release the button to initiate the Seek mode, which moves through the stations incrementally. The system will stop tuning on the next available FM frequency.

–Press and momentarily hold the button to initiate the Scan mode. The system will automatically stop and play each radio station it receives strongly for approximately three seconds. Press the button again when the system lands on the station you want to hear.

•Press the FM STEREO button to toggle between STEREO and MONO modes to help improve reception.

NOTE: A FM radio station must be transmitting in stereo for you to receive it in stereo.

•If the STEREO indicator (ST) is fading in and out, change from FM Stereo to FM Mono to improve reception.

STORING STATIONS IN MEMORY

You can preset as many as 32 stations for easy access.

1.Choose the radio band and station.

2.Press the SET button. The PR on the program indicator will blink.

3. Press one of the Search buttons ( or ) to choose the preset number.

4.Press SET again to store the station in memory.

AUTO PRESET PROGRAMMING

While in the FM band, your system is capable of automatically programming into its memory any FM stations broadcasting in stereo in your area. Simply press and hold the TUNER button for approximately one second. “AUTO PRESET PROGRAMMING” will scan across the display while the mode is active.

When finished, the system will tune to the first preset station.

NOTE: This feature will overwrite any stored information already stored in the presets.

RECALLING PRESET STATIONS

1.Press the PRESET/TUNE button to activate the Preset mode.

2.Press the SEARCH button or to move through the list of preset stations until you find the one you want.

USING THE CD PLAYER

1	2	3
		DISC CHANGE OPEN / CLOSE
3 D I S C S D I R E C T A C C E S S
H I G H P E R F O R M A N C E	3DISC	A U D I O S Y S T E M

LOADING DISCS

1.Press the OPEN/CLOSE button to open the CD compartment drawer.

2.Place the CD(s) into the tray.

3.Press the DISC CHANGE button to rotate the drawer in order to load a third CD.

PLAYING DISCS

After you get the discs loaded, press the DISC CHANGE button to select a disc and then push PLAY, or press the Direct Disc Access button of your choice and the disc will begin playing once it is in the play position. The display will show which CD you have chosen to play, the track number and its running time.

Press STOP () to end disc play.

CD PLAYING TIME

The elapsed time for a track appears in the display while the track is playing.

12