Stanley Black & Decker EP30200 user manual Equipment Maintenance & Care

Page 11

EQUIPMENT MAINTENANCE & CARE

NOTICE

In addition to the Safety Precautions in this manual, observe the following for equipment protection and care.

•Check that the pin holder is not burnt or not holding the pin tightly. If not, remove the ring holder, clean all the parts and squeeze the fingers of the pin holder together.

•Check the cables on the gun from time to time for damage. Replace as required.

•Check that the lift level is correct with lift level tool.

•Always store the tool in a clean dry space, safe from damage or pilferage.

•Always keep critical equipment markings, such as warning stickers and tags legible.

•Equipment repair should be performed by experienced personnel only.

•Do not use the equipment for applications for which it was not intended.

EP30200 User Manual ◄ 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents
Electronic PIN Brazing Unit All Declaration of ConformityWeisbeck, Andy Table of Contents Local Safety Regulations Safety SymbolsSafety Precautions EP30200 Operation Initial Setup and Battery Charging Changing PIN and Ring Holder Select Pins and Rings Prepare the Rail Surface Placing the Grounding CableSET Control for PIN Size Adjusting Brazing PIN Distance to Braze SurfaceLoading PIN and Ring EP30 does not have a power switch EP30200 TroubleshootingEquipment Maintenance & Care Accessories SpecificationsCable Lugs for Pin Brazing to rail Brazing Pins & Ceramic Rings Standard Brazing PinsCeramic Rings PIN & Ring HoldersBonding Cable with Lugs for Pin Brazing ConnectorsFuses, Chargers, & Batteries Grinder AbrasivesGrinder CablesTools GunsPlugs EP30 Parts Illustration Internal Electronic Control BOX EP30 Parts List
Top Page Image Contents