Specifications

SPECIFICATIONS
Drive Size				1-inch Square Drive
Weight				26 lbs/12 kg
Overall Length				14-1/2-inch/37 cm
Width				4-inch/11 cm
Pressure Range			1500-2000 psi/105-140 bar
Flow Range				7-12 gpm/20-45 lpm
Optimum Flow				8 gpm/30 lpm
System Type	Open and Closed Center, HTMA Type II or III
Porting				8 SAE O-ring
Output Speed (free spin)				2000 rpm at 5 gpm/19 lpm
Input Speed				1200 Impacts per Minute
Connect Size and Type			3/8-inch Male Pipe Adapter
Torque		500–2500 ft. lb/680–3400 Nm

SOUND AND VIBRATION DECLARATION
Test conducted on IW16157, S/N 9524, operated at standard 10 gpm input

Measured A-weighted sound power level, Lwa (ref. 1pW) in decibels				113.2 dBA

Uncertainty, Kwa, in decibels				3 dBA

Measured A-weighted sound pressure level, Lpa (ref. 20 µPa) at operator’s position,				102.2 dBA
in decibels				102.2 dBA
in decibels
Uncertainty, Kpa, in decibels				3 dBA

Values determined according to noise test code given in ISO 15744, using the basic standard ISO 3744
NOTE: The sum of a measured noise emission value and its associated uncertainty represents an upper bound-
ary of the range of values which is likely to occur in measurements.
Declared vibration emission value in accordance with EN 12096

Measured vibration emission value: a				49 m/sec²

Uncertainty: K				5.2 m/sec²

Values determined according to ISO 8662-7

14 ► IW16 User Manual

SOUND AND VIBRATION DECLARATION