TABLE OF CONTENTS |
|
DECLARATION OF CONFORMITY | 2 |
SAFETY SYMBOLS | 4 |
SAFETY PRECAUTIONS | 5 |
TOOL STICKERS & TAGS | 6 |
HOSE TYPES | 7 |
HOSE RECOMMENDATIONS | 8 |
FIGURE 1. TYPICAL HOSE CONNECTIONS | 8 |
HTMA REQUIREMENTS | 9 |
WRENCH TORQUE INFORMATION | 10 |
WRENCH OPERATION | 11 |
EQUIPMENT PROTECTION & CARE | 12 |
TROUBLESHOOTING | 13 |
SPECIFICATIONS | 14 |
ACCESSORIES | 15 |
IW16 PARTS ILLUSTRATION | 16 |
IW16 PARTS LIST | 17 |
VALVE HANDLE CHANGE NOTICE | 18 |
IW16 EXTENSION HANDLE ILLUSTRATION | 19 |
UNDERWATER TOOLS DEPTH GUIDELINE | 20 |
IMPORTANT
To fill out a Product Warranty Recording form, and for information on your warranty,
visit Stanleyhydraulics.com and select the Company tab, Warranty.
(NOTE: The warranty recording form must be submitted to validate the warranty).
SERVICING: This manual contains safety, operation, and routine maintenance instructions. Stanley Hydraulic Tools recommends that servicing of hydraulic tools, other than routine maintenance, must be performed by an authorized and certified dealer. Please read the following warning.
WARNING
SERIOUS INJURY OR DEATH COULD RESULT FROM THE IMPROPER REPAIR OR
SERVICE OF THIS TOOL.
REPAIRS AND / OR SERVICE TO THIS TOOL MUST ONLY BE DONE BY AN
AUTHORIZED AND CERTIFIED DEALER.
For the nearest authorized and certified dealer, call Stanley Hydraulic Tools at the number listed on the back of this manual and ask for a Customer Service Representative.
IW16 User Manual ◄ 3