Safety Precautions

To avoid serious injury or death

	Read the Manual	Wear Eye
	Read the Manual	Protection
		Protection

	Wear Ear	Wear Dust Mask
	Protection	Wear Dust Mask
	Protection
		47351

Tool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose.

These safety precautions are given for your safety. Review them carefully before operating the tool and before performing general maintenance or repairs.

Supervising personnel should develop additional precautions relating to the speciﬁ c work area and local safety regulations. If so, place the added precautions in the space provided on page 5.

The model HD45 Hydraulic Hammer Drill will provide safe and dependable service if operated in accordance with the instructions given in this manual. Read and under- stand this manual and any stickers and tags attached to the tool and hose before operation. Failure to do so could result in personal injury or equipment damage.

•The operator must start in a work area without bystanders. Flying debris can cause serious injury.

•Do not operate the tool unless thoroughly trained or under the supervision of an instructor. Establish a training program for all operators to ensure safe operation.

•Always wear safety equipment such as goggles, ear and head protection, and safety shoes at all times when operating the tool. Use gloves and aprons when necessary.

•The operator must be familiar with all prohibited work areas such as excessive slopes and dangerous terrain conditions.

•Do not inspect, clean or replace any part(s) if the hydraulic power source is connected. Do not inspect or clean the tool while the hydraulic power source is connected. Accidental engagement of the tool can cause serious injury.

•Always connect hoses to the tool hose couplers before energizing the hydraulic power source. Be sure all hose connec- tions are tight and are in good condition.

•Do not operate the tool at oil temperatures above 140°F/60°C. Operation at higher temperatures can cause higher than normal temperatures at the tool which can result in operator discomfort.

•Do not operate a damaged, improperly adjusted, or incompletely assembled hammer drill.

•Never wear loose clothing that can get entangled in the working parts of the tool.

•Keep all parts of your body away from the drill and maintain proper footing and balance at all times.

•When working near electrical conductors, always assume that all conductors are energized and that insulation, clothing and hoses can conduct electricity. Stay a safe distance away from electrical conductors.

•If the hydraulic power supply has been interrupted, place the hammer drill in the OFF position before restarting the hy- draulic power supply.

•To avoid personal injury or equipment damage, all tool repair, maintenance and service must only be performed by au- thorized and properly trained personnel.

•Never rest the tool on your foot.

•Never allow your face to come close to the tool.

•Never start the tool while it is lying on the ground.

HD45 specifications

The Stanley Black & Decker HD45 is a powerful and versatile tool designed for professionals and DIY enthusiasts alike. This rugged and durable hammer drill is engineered to handle a variety of tasks, making it a go-to solution for both construction sites and home improvement projects. With a focus on performance, practicality, and safety, the HD45 brings together innovative features and advanced technologies to deliver exceptional results.

One of the standout features of the HD45 is its robust motor, which delivers high torque and variable speeds, allowing users to drill through various materials such as wood, fiberglass, and metal with ease. The drill's two-speed settings enable users to switch between high-speed drilling and high-torque applications, providing versatility for different types of jobs. This adaptability ensures that the HD45 can take on challenging tasks without compromising on efficiency.

Another important characteristic of the HD45 is its ergonomic design. The drill is equipped with a comfortable, non-slip grip that allows for better control during operation, reducing user fatigue over extended use. Additionally, the compact and lightweight construction makes it easy to maneuver in tight spaces, which is particularly helpful when working on intricate projects or reaching overhead.

The HD45 also integrates several advanced technologies to enhance its usability and performance. One such technology is the electronic clutch, which provides precise control over torque settings. This feature prevents overdriving screws and allows for consistent results across various materials. Furthermore, the built-in LED work light illuminates the workspace, providing visibility in dimly lit areas and ensuring accurate drilling every time.

Safety is a top priority for Stanley Black & Decker, and the HD45 reflects this commitment. The drill is equipped with a robust safety switch that prevents accidental startups, ensuring that users can handle the tool with confidence. Additionally, the durable housing of the drill is designed to withstand heavy-duty use, offering longevity and reliability on the job.

In conclusion, the Stanley Black & Decker HD45 is a high-performance hammer drill that combines power, versatility, and safety features. With its advanced motor, ergonomic design, and innovative technologies, it is an indispensable tool for anyone looking to tackle a wide range of drilling and fastening tasks. Whether for professional construction or home improvement, the HD45 is ready to deliver outstanding results.