Panasonic SC-PT464 Selecting the playback source, Getting Started Discs, Playing, Select an item

Presetting stations manually

Up to 30 stations can be set.

1While listening to the radio broadcast

Press [OK].

2While the frequency is flashing on the display

Press the numbered buttons to select a channel.

≥To select a 2-digit number e.g. 12: [S10] B [1] B [2]

Alternatively, press [X, W], and then press [OK].

Main unit:

1While listening to the radio broadcast

Press [MEMORY] twice.

2While a channel number is flashing on the display Press [X TUNE W], and then press [MEMORY].

A station previously stored is overwritten when another station is stored in the same channel preset.

FM frequency step

The step is factory-set to 0.2-MHz, but you can change it to receive broadcasts allocated in 0.1-MHz steps. You may need to change this setting if the tuner seems to skip over the correct frequency for stations in your area.

Press and hold [FUNCTIONS].

After a few seconds, the display changes to show the current minimum frequency. Continue to hold the button down. The minimum frequency changes and the step is changed.

e.g. 87.9 (Factory preset) ,# 87.5

To return to the original step, repeat the above step.

[Note]

After changing the setting, previously preset frequencies will be cleared. Preset them again.

Getting Started

Discs

Selecting the playback source

Playing

START START

OK OK

Selecting the source from the START menu

You can select desired source or access playback/menus by using the START menu.

When “Input select” is selected

You can select a desired source from the menu.

≥DVD/CD (B 9), FM (B 10), AUX§ (B 12), DIGITAL IN§ (B 12),

iPod (B 22)

§	“(TV)” will appear beside “AUX” or “DIGITAL IN”, indicating the TV		Operations
	audio setting for VIERA Link “HDAVI Control” (B 20).
When a disc is loaded, you can also access playback or menus from the
START menu.
e.g. [DVD-V]
	DVD/CD	Home theater	Other
	Playback Disc	Playback/menu access
	TOP MENU (DVD)
	MENU (DVD)
	Input select
	OK
	RETURN

When the on-screen control panel appears

e.g. [DVD-V] (when “Playback Disc” is selected from the START menu)

Reference

You can operate the playback with the indicated controls.

(Continued on next page)

1

2

TAR
S	T

OK

Show the START menu.

This unit automatically turns on. (The TV also turns on when using VIERA Link “HDAVI Control”. This works only when in “DVD/CD” or “IPOD” mode without any disc/ device being loaded/connected.) e.g.

DVD/CD Home theater

Input select

OK

RETURN

Select an item.

≥To exit, press [START].

RQTX0217

11