Stanley Black & Decker IW12 user manual Specifications, Accessories

SPECIFICATIONS
Drive Size	3/4-inch Square Drive, 5/8-inch Hex Quick Change
Weight		14 lbs/6 kg
Overall Length		9-1/2-inch/24 cm
Width		4-inch/10 cm
Pressure Range	1000-2000 psi/70–140 bar
Flow Range	4–12 gpm/15–45 lpm
Optimum Flow	5–10 gpm/20–38 lpm
System Type	Open and Closed Center, HTMA Type II or III
Porting		8 SAE O-ring
Output Speed (free spin)	2000 rpm at 5 gpm/19 lpm
Input Speed	1200 Impacts per Minute
Connect Size and Type	3/8-inch Male Pipe Adapter
Torque	250–1200 ft. lb/340–1632 Nm
SOUND AND VIBRATION DECLARATION
Test conducted on 1212140, S/N 121610100 operated at standard 10 gpm input
Measured A-weighted sound power level, Lwa (ref. 1pW) in decibels		108 dBA
Uncertainty, Kwa, in decibels		3 dBA
Measured A-weighted sound pressure level, Lpa (ref. 20 µPa) at operator’s position, in decibels		95 dBA
Uncertainty, Kpa, in decibels		3 dBA
Values determined according to noise test code given in ISO 15744, using the basic standard
ISO 3744
NOTE: The sum of a measured noise emission value and its associated uncertainty represents
an upper boundary of the range of values which is likely to occur in measurements.
Declared vibration emission value in accordance with EN 12096
Measured vibration emission value (Main Handle): a		10.9 m/sec²
Uncertainty: K		1.2 m/sec²
Measured vibration emission value (Assist Handle): a		11.2 m/sec²
Uncertainty: K		1.2 m/sec²
Values determined according to ISO 28927-2, ISO 5349-1,2
ACCESSORIES
Description		Part Number
3/4-inch Square Anvil to 3/4-inch Jacobs Chuck		01857
7/16-inch Hex Shank ⋅ 1/2-inch Square Male Adapter		05117
5/8-inch Hex Shank ⋅ 1/2-inch Square Male Adapter		05080
3/4-inch Square Anvil to 5/8-inch Hex Quick Change Adapter		06790
AUGER DRILL BITS – LINEMAN’S STYLE
5/8-inch Hex Shank use with Hex Adapter 06790
5/8 Hex Pole Bit, 9/16 ⋅ 18 ⋅ 22 Overall Length		27845
5/8 Hex Pole Bit, 13/16 ⋅ 18 ⋅ 22 Overall Length		27847
Assist Handle Kit		71706

14 ► IW12 User Manual