Multi-type Air conditioner

OPERATING TIPS

This indoor unit can be connected to a multi-type outdoor unit. The multi-type air conditioner allows multiple indoor units to be operated in multiple locations. The indoor units may be operated simultaneously, in accordance with their respective output.

Simultaneous Use of Multiple Units

Instructions relating to inverter (❖) are applicable only to “INVERTER MODEL”.

●When using a multi-type air conditioner, the multiple indoor units can be operated simultaneously, but when two or more indoor units of the same group are oper- ated simultaneously, the heating and cooling efficiency will be less than when a single indoor unit is used alone. Accordingly, when you wish to use more than one in- door unit for cooling at the same time, the use should be concentrated at night and other times when less out- put is required. In the same way, when multiple units are used simultaneously for heating, it is recommended that they be used in conjunction with other auxiliary space heaters, as required.

●Seasonal and outdoor temperature conditions, the struc- ture of the rooms and the number of persons present may also result in differences of operating efficiency. We recommend that you try various operating patterns in order to confirm the level of heating and cooling out- put provided by your units, and use the units in the way that best matches your family's lifestyle.

●If you discover that one or more units delivers a low level of cooling or heating during simultaneous opera- tion, we recommend that you stop simultaneous opera- tion of the multiple units.

❖● Operation cannot be done in the following different op- erating modes.

If the indoor unit is instructed to do an operating mode

that it cannot perform, will be shown on the re- mote controller display and the unit will go into the standby mode.

Heating mode and cooling mode (or dry mode)

Heating mode and fan mode

❖● Operation can be done in the following different operat- ing modes.

Cooling mode and dry mode

Cooling mode and fan mode

Dry mode and fan mode

❖● The operating mode (heating mode or cooling (dry) mode) of the outdoor unit will be determined by the op- erating mode of the indoor unit that was operated first. If the indoor unit was started in fan mode, the operating mode of the outdoor unit will not be determined.

For example, if indoor unit (A) was started in fan mode and then indoor unit (B) was then operated in heating mode, indoor unit (A) would temporarily start opera- tion in fan mode but when indoor unit (B) started oper-

ating in heating mode, will be shown on the re- mote controller display and it would go into standby mode. Indoor unit (B) would continue to operate in heat- ing mode.

Notice

Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).

*● During use of the heating mode, the outdoor unit will occasionally commence the defrost operation for brief periods. During the defrosting operation, if the user sets the indoor unit for heating again, the defrosting mode will continue, and the heating operation will begin after completion of defrosting, with the result that some time may be required before warm air is emitted.

*● During use of the heating mode, the top of the indoor unit may become warm, but this is due to the fact that coolant is circulated through the indoor unit even when it is stopped; it is not a malfunction.

En-10

9368987060-01_OM_en.p65

2/4/10, 4:45 PM

P/N9368987060-01 specifications

Friedrich P/N9368987060-01 is a sophisticated, compact air conditioning unit designed to deliver efficient cooling and comfort in various indoor environments. Known for its reliability and innovative features, this model caters to both residential and light commercial applications, making it a versatile choice for many users.

One of the main features of the Friedrich P/N9368987060-01 is its impressive energy efficiency. It is equipped with advanced cooling technology that allows it to operate in an environmentally friendly manner while significantly reducing energy consumption. This not only helps lower electricity bills but also minimizes the unit's carbon footprint, aligning with modern sustainability goals.

The unit incorporates a powerful yet quiet compressor, providing optimal cooling performance without the disruptive noise levels often associated with traditional air conditioning systems. This feature makes it ideal for use in bedrooms, offices, or any space where a peaceful atmosphere is essential.

In terms of control and convenience, Friedrich has integrated a user-friendly digital display. This allows users to easily monitor and adjust settings, enhancing the overall experience. The unit also supports remote operation, so users can adjust the temperature or switch modes from anywhere in the room, further enhancing user convenience.

Friedrich P/N9368987060-01 comes with multiple cooling modes and fan speeds, offering customizable comfort for different situations. The cooling mode is perfect for hot summer days, while the fan-only mode is ideal for circulating air without additional cooling. Additionally, it features an energy-saving mode that automatically adjusts the temperature and fan speed based on current conditions, ensuring energy conservation without sacrificing comfort.

Further extending its appeal, the unit is designed with enhanced air filtration technology. A high-quality filter captures dust, allergens, and other airborne particles, contributing to improved indoor air quality. This feature is essential for maintaining a healthy living environment, particularly for those with allergies or respiratory conditions.

Overall, the Friedrich P/N9368987060-01 stands out in the air conditioning market for its blend of efficiency, technology, and user-centric design. With its commitment to performance and comfort, this model is a reliable choice for anyone looking to enhance their indoor climate experience.