Lincoln Electric LN-25 Required Options, Required OPTIONS, General Options, Weld Power Cables

RECOMMENDED OPTIONS

				REQUIRED OPTIONS
				Magnum Gas-Shielded Gun and
				Cable Assemblies
				Available 200-550 amps, air-cooled,
	Magnum 400 shown			gas-shielded welding guns.
				See publication E12.10
				Magnum Self-Shielded Gun and
				Cable Assemblies
				Available 250-600 amps.
	K126 Innershield Gun			See publication E12.110
		shown
			DRIVE ROLL AND GUIDE TUBE KITS
Wire Type					Order
and Sizes					Number
Solid Wire:
.023 - .025" (0.6 mm)					KP653-025S
.030" (0.8 mm)					KP653-030S
.035" (0.9 mm)					KP653-035S
.045 - .052" (1.2 - 1.4 mm)					KP653-052S
Cored Wire:
.035" (0.9 mm)					KP653-035C
.045 - .052" (1.2 - 1.4 mm)					KP653-052C
Solid or Cored Wire:
.052 - 1/16" (1.3 - 1.6 mm)					KP653-1/16
.068 - 5/64" (1.7 - 2.0 mm)					KP653-3/32
Aluminum Wire:
.035" (0.9 mm)					KP654-035A
3/64" (1.2 mm)					KP654-3/64A
1/16” (1.6 mm)					KP654-1/16A
Aluminum Wire (Clutched Drive Roll):
.035" (0.9 mm)					KP1682-035A
1.0 mm					KP1682-1.0A
3/64" (1.2 mm)					KP1682-3/64A
1/16” (1.6 mm)					KP1682-1/16A
			WELD POWER CABLES
Order No.			Description
K1841-25			Twist-Mate to Twist-Mate, 1/0, 350A, 60% duty cycle, 25 ft. (7.6m)
K1841-50			Twist-Mate to Twist-Mate, 2/0, 350A, 60% duty cycle, 50 ft. (15.2m)
K1842-10			Lug to Lug, 3/0, 600A, 60% duty cycle, 10 ft. (3.0m)
K1842-35			Lug to Lug, 3/0, 600A, 60% duty cycle, 35 ft. (10.6m)
K1842-60			Lug to Lug, 3/0, 600A, 60% duty cycle, 60 ft. (18.2m)
K1842-110			Lug to Lug, 4/0, 600A, 60% duty cycle, 110 ft. (33.5m)

REQUIRED OPTIONS, CON'T

Twist-Mate Cable Plug

For connecting welding cable to output terminal receptacles. For 1/0 – 2/0 (50 – 70 mm2) cable.

Order K852-70

Twist-Mate Cable Plug

For connecting welding cable to output terminal receptacles. For 2/0 – 3/0 (70 – 95 mm2) cable.

Order K852-95

Cable Lug

For #1 1/0-2/0 cable.

Order S1119-14

GENERAL OPTIONS

Jumper Plug Kit

For use with CV only power sources with 14 pin MS-type wire feeder connections and no contactor con- trol switch. Jumper plug kit closes contactor for always hot welding output.

Order K484

Terminal Strip Remote Voltage Control Kit

Provides 25 ft. (7.6m) of remote output voltage control with power sources having a terminal strip.

Order K444

6 Pin Remote Voltage Control Kit

Provides 25 ft. (7.6m) of remote voltage control when used with power sources having a 6 pin MS-type connector.

Order K444-1

14 Pin Remote Voltage Control Kit Provides 25 ft. (7.6m) of remote output voltage control and output jumper (2 and 4) for power sources having a 14 pin MS-type connector.

Order K444-2

42 Volt Remote Output Control Module

Provides remote voltage control and power source output control. Requires 42 volt auxiliary power. Mounts inside LN-25 control box. Requires K1819-10 Wire Feeder Control Cable.

Order K624-1

LN-25 Wire Feeder

[6] www.lincolnelectric.com