Lincoln Electric LN-25 Weld Power Cable, Across the ARC SET-UP with Electrode Cold Operation

SYSTEM SELECTION

ACROSS THE ARC SET-UP (with Electrode Cold Operation)

Electrode cold operation is available with K449 or K428 (with optional K443-2 Internal Contactor Kit installed).

(Connections are for current equipment design. Subject to change without notice.)

Output Terminals

Always Hot.

CCPower Source, RangerTM 10,000, Ranger 3 Phase,

SAE 400 with CV Adapter

Weld Power Cable

LN-25 Wire Feeder

K449 or K428 (with K443-2)

Magnum gun and

cable assembly

Ranger 250, Ranger 250 LPG,

Ranger 305G, Ranger 305D,

Commander® 300,

Vantage® 500,

Air Vantage® 500,

Engine Driven Welders

with Wire Feed Module

Output Terminals

Always Hot.

Power source contactor switch must be in the “ON” position.

LN-25 Wire Feeder

K449 or K428 (with K443-2)

Magnum gun and

(local/remote switch in local position)

Weld Power Cable

		Output Terminals
		Always Hot.
CV-250,
CV-300,	14 Pin	Order K484 Jumper
CV-400,
		Plug Kit.
CV400-I,
CV500-I

Weld Power Cable

		Output Terminals
		Always Hot.
CV-655,
DC-400,
DC-600,	14 Pin	Power source contactor
DC-655,		switch must be in the
V350-PRO		“ON” position or use
		K484 Jumper Plug Kit.

Weld Power Cable

cable assembly

LN-25 Wire Feeder

K449 or K428 (with K443-2)

Magnum gun and

cable assembly

LN-25 Wire Feeder

K449 or K428 (with K443-2)

Magnum gun and

cable assembly

LN-25 Wire Feeder

[3] www.lincolnelectric.com