Lincoln Electric IM665 manual Output Connections, Torch

Page 11

A-4

INSTALLATION

A-4

 

 

 

NOTE: When using nitrogen gas from a cylinder, the cylinder must have a pressure regulator.

•Maximum psi from a nitrogen gas cylinder to the PRO-CUT 25 regulator should never exceed 150 psi.

•Install a hose between the nitrogen gas cylinder regulator and the PRO-CUT 25 gas inlet

WARNING

.

CYLINDER could explode if damaged.

• Keep cylinder upright and chained to a fixed support.

• Keep cylinder away from areas where it could be damaged.

•Never lift machine with cylinder attached.

•Never allow the cutting torch to touch the cylinder.

•Keep cylinder away from live electrical parts.

•Maximum inlet pressure 150 psi.

__________________

OUTPUT CONNECTIONS

Torch

The PRO-CUT 25 is sent from the factory with a 15’ PCT 20 cutting torch installed. Additional cutting torch- es can be ordered from the K1615 series. Hand-held torches come with 15' or 25’ cables.

Read and understand this entire section before oper- ating the machine.

PRO-CUT 25

Page 10 Page 12
Image 11
Page 10 Page 12
Contents PRO-CUT TM California Proposition 65 Warnings SafetyElectric Shock can kill Welding Sparks can cause fire or explosion Sûreté Pour Soudage a L’Arc Précautions DE SûretéPlease Examine Carton and Equipment For Damage Immediately Table of Contents Technical Specifications PRO-CUT 25 K1756-1 InstallationInput Electrical Connections Safety Precautions Electric Shock can KillSelect Proper Location High Frequency Interference ProtectionGAS Input Connections Torch Output ConnectionsDescription Safety PrecautionsPreheat Temperature for Plasma Cutting OperationUser Responsibility Operational Features and ControlsDesign Features Advantages Consumable Life Cutting CapabilityLimitations Controls and SettingsElectric Shock can Kill Pilot ARC DiscussionGeneral In All Cases Procedure RecommendationsGeneral Options Accessories AccessoriesPeriodic Maintenance MaintenanceRoutine Maintenance HOW to USE Troubleshooting Guide TroubleshootingTroubleshooting Troubleshooting Possible Areas Or dross Symptom Check Diagrams PRO-CUT 25 Wiring DiagramPrecaucion Warnung
Related manuals
Manual 29 pages 30.82 Kb
Top Page Image Contents