Lincoln Electric IM665 manual Installation, Technical Specifications PRO-CUT 25 K1756-1

A-1	INSTALLATION		A-1
TECHNICAL SPECIFICATIONS - PRO-CUT 25 (K1756-1)
	INPUT - SINGLE PHASE / 60 HERTZ ONLY
	Standard Voltage	1Ø Input Current at Rated Output
	115/230/1/50/60Hz	115 V : 15 A @ 20%
		115 V : 26.7A@ 60%
		115 V : 37.7A@ 35%
		230 V : 15 A@100%
		230 V : 19 A @ 60%

RATED OUTPUT

Duty Cycle	AMPS
20% on 115 V	15 A
60% on 115 V	20 A
100% on 230 V	20 A
35% on 115 V	25 A
60% on 230 V	25 A

Current

Range

12-25 Amps

OUTPUT

Open Circuit

Voltage

400 VDC

Pilot Current

12 Amps

REQUIRED GAS FLOW RATE

55 PSI @ 240 SCFH

( 3.8 Bar. @ 6800 LHR)

REQUIRED GAS INLET PRESSURE

65 to 150 PSI

(4.5 Bar. TO 10.3 Bar.)

RECOMMEND INPUT WIRE AND FUSE SIZES

For all plasma cutting applications

Based on U.S. National Electrical Code

Ambient Temperature 30oC or Less

Output	AC Input		Fuse	Type 75oC
		Input Cord
	Voltage	Plug	(Super Lag)	Copper Wire in Conduit
	at	Size	Circuit Breaker	AWG (IEC) Sizes
	50/60		(Delay Type)
	Hertz			2 Input Supply Wires	1 Ground Wire
25 A	230V-1Ø		20 AMPS	#14 (2.5 mm2)	#14 (2.5 mm2)
		6-20P or 6-30P or 6-50P
15 A	115V-1Ø	5-15P* or 5-20P* or 5-30P or 5-50P	15 AMPS	#12 (4 mm2)	#12 (4 mm2)
20 A	115V-1Ø	5-20P* or 5-30P or 5-50P	20 AMPS	#12 (4 mm2)	#12 (4 mm2)
25 A	115V-1Ø	5-30P or 5-50P	30 AMPS	#12 (4 mm2)	#12 (4 mm2)

PHYSICAL DIMENSIONS

Height

10.2in. 260 mm

Width

6.3in.

160 mm

Depth

16.1in. 410 mm

Weight

Including

Torch Cable

35lbs. 15.9 kg.

* Included with machine

PRO-CUT 25