Lincoln Electric IM732-B manual Thermal, CONTROL-REMOTE , Local, Weld Mode Select

Page 15

 

OPERATION

B-2

B-2

 

 

 

5. THERMAL

•This status light indicates when the power source has been driven into thermal overload. If the output terminals were "ON", the "ON" light will blink indicat- ing that the output will be turned back on once the unit cools down to an acceptable temperature level. If the unit was operating in the "REMOTE" mode, the trigger will need to be opened before or after the thermal has cleared and closed after the machine has cooled down to an acceptable temperature to establish output.

6. CONTROL-REMOTE , LOCAL

•Two status lights indicate the location of output con- trol as pre-determined by the power sources auto- configure system.

•The LOCAL display will be lit when control is at the power source.

•The REMOTE display will be lit when a remote pot/control is detected.

These Output Control configurations can be overrid- den (switched) with the CONTROL push button. When changed, the unit will power up in the configura- tion it was in when it was last powered down.

Hidden Middle Control Panel – Process Set Up Panel

The middle control panel is removable to allow for upgrades (see Field Installed Options/Accessories). Additionally, this panel is hidden by an access door to reduce appeared complexity and provide protection to the controls.

7. WELD MODE SELECT

The Mode Control button selects the following welding modes desired.

CC-STICK SOFT: The Stick Soft process features continuous control ranging from 5 to 425 amps. This mode was intended for most SMAW applications, and Arc Gouging.

•Arc Gouging: Setting the output of the Stick Soft mode to 425 amps will enable the arc-gouging mode. The actual output current will depend on the size of carbon used. The recommended maximum size carbon is 5/16".

•The Hot Start control regulates the starting current at arc initiation. Hot Start can be adjusted from min- imum (0), with no additional current added at arc start, to maximum (10), with double the preset cur- rent or 425 amps (max of machine) added for the first second after arc initiation.

•The Arc Control regulates the Arc Force to adjust the short circuit current. The minimum setting (-10) will produce a "soft" arc and will produce minimal spatter. The maximum setting (+10) will produce a "crisp" arc and will minimize electrode sticking.

CC-STICK CRISP: The Stick Crisp mode features continuous control from 5 to 425 amps. This mode was intended primarily for pipe welding applications.

•The Hot Start control regulates the starting current at arc initiation. Hot Start can adjust starting current up or down by 25% of the preset value. The recom- mended setting for Hot Start is 5 where the initial current is equal to the preset current.

 

FIGURE 1

 

1

 

 

 

5

AMPS

VOLTS

6

CONTROL

 

WELD TERMINALS

 

REMOTE

 

REMOTE

 

LOCAL

OUTPUT

ON

 

SELECT

SELECT

 

 

7

 

 

 

11

12

2

3

4

8

9

10

INVERTEC® V350-PRO (CE)

Page 14 Page 16
Image 15
Page 14 Page 16
Contents IP23S Invertec V350-PRO CE JuneCalifornia Proposition 65 Warnings SafetyElectric Shock can kill Iii Welding and Cutting Sparks can Cause fire or explosionIvSAFETY Invertec V350-PRO CE Electromagnetic Compatibility EMCSafety Thank You Table of Contents Duty Cycle Current InstallationOperating Temperature Range Storage Temperature RangeSelect Suitable Location Safety PrecautionsConnection of Wire Feeders to V350-PRO CE Remote Control of InvertecUndercarriage Mountings Parallel Operation Output Control OperationProduct Description & Duty Cycle Volt MeterWeld Mode Select ThermalCONTROL-REMOTE , Local TIG Solenoid Option Lower Case FrontAuxiliary Power LimitationsRecommended Processes Field Installed Options AccessoriesOptions / Accessories Welding Cable ConnectorsPeriodic Maintenance MaintenanceCapacitor Discharge Procedure Routine MaintenanceHOW to USE Troubleshooting Guide TroubleshootingContact your local Lincoln Authorized Field Service Facility Contact your local Lincoln Authorized Field Service FacilityCPU Displays Description Scrolling dash Diagrams Remote Control AdaptersInvertec V350-PRO M O T E C O N T R O L K867 Plug to LN-7 Connection DiagramK867 Plug to LN-25 Connection Diagram A P T E R P L U G W E R S O U R C E K867 Universal Adapter / Invertec Connection DiagramK876 Adapter to LN-25 Connection Diagram N D a M P T R O L X I L I a R Y P O W E R O T a M P T R O L K864 Adapter to LN-7 & Remote Control Connection DiagramInvertec V350-PRO CE Dimension Print Invertec V350-PRO CE Warnung Precaucion

IM732-B specifications

The Lincoln Electric IM732-B is a cutting-edge inverter-based multi-process welding machine designed for both professional welders and industrial applications. It offers an array of features that enhance its versatility, efficiency, and ease of use, making it an indispensable tool in various welding environments.

One of the standout features of the IM732-B is its ability to perform multiple welding processes. This machine seamlessly transitions between MIG, TIG, and stick welding, allowing users to effortlessly switch techniques depending on the job requirements. This flexibility makes it suitable for a diverse range of materials, including steel, stainless steel, and aluminum.

Equipped with advanced inverter technology, the IM732-B provides superior arc stability and reduced spatter, resulting in cleaner welds and less rework. This technology also contributes to the machine’s lightweight and compact design, making it highly portable for on-site jobs or restricted workspace environments. Its built-in thermal overload protection ensures that the machine operates safely and maintains optimal performance even under demanding conditions.

The digital display and intuitive user interface of the IM732-B simplify the setup and adjustment processes. Users can easily monitor welding parameters and make real-time adjustments, enhancing precision and control during the welding process. Additionally, the machine features a variety of preset welding programs tailored for different materials and applications, enabling even novice welders to achieve professional results.

Another notable characteristic of the Lincoln Electric IM732-B is its energy efficiency. The inverter technology consumes less power compared to traditional welding machines, reducing operational costs and making it an eco-friendly choice for businesses aiming to minimize their carbon footprint.

Durability is also a key aspect of the IM732-B’s design. Constructed with rugged materials and components, it is built to withstand the rigors of daily use in challenging environments. This reliability translates to lower maintenance costs and a longer service life.

In conclusion, the Lincoln Electric IM732-B stands out as a versatile and technologically advanced welding machine, catering to the needs of modern welders. With its multi-process capabilities, superior arc performance, user-friendly interface, energy efficiency, and robust construction, it is a trusted choice for both industrial applications and professional welding projects.
Top Page Image Contents