Replacingthe saw blade
Do not replace with saw blade bigger than
To replace the saw blade, grip the outer flange with a wrench (22). then remove the hex bolt with a socket wrench. The blade comes off easily.
Fig. 10
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance
Replacingcarbon brushes
Remove and' check the carbon brushes
regularly. Replace when they wear down to | L | Limit markA | |
the limit mark. Keep the carbon brushes | |||
clean and free to slip in the holders Both | |||
carbon brushes should be replaced at | |||
the same time, Use only identical carbon | |||
brushes | *' |
| Fig. 11 |
|
|
| |
Use a screwdriver to remove the brush holder caps. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps.
Brush holder cap
Screwdriver
Fig. 12
To maintain product SAFETY and RELIABILITY, repairs. any other maintenance or adjust- ment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts
9