Depth of cut, secure the base by tightening

Adjusting depth of cut	I
Loosen the lever on the depth guide and
move the base up or down. At the desired
depth of cut, secure the base by tightening
the lever.

CAUTION:

Fig. 11

0 Use a shallow depth of cut when cutting thin workpiece for cleaner, safer cuts. 0 After adjustingthe depth of cut, always tighten the lever securely.

Bevel cutting

Loosen the lever on the bevel scale plate on the front of the base. Set for the desired angle (0'-45') by tilting accordingly, then tighten the lever securely.

p v e l scale plate Lever

Fig. 12

Sighting

The front of the base is notched to provide two guide edges.

For straight cuts, align the edge with 0 en- graved on it with your cutting line on the work piece.

For 45' bevel cuts, align the edge with 45' engraved on it with your cutting line.

Fig. 1

depth of cut, secure the base by tightening