Specific Safety Rules

1.DANGER! Keep hands away from cutting area and blade. Keep your second hand on auxiliary handle, or motor housing. If both hands are holding the saw, they cannot be cut by the blade.

Keep your body positioned t o either side of the saw blade, but not in line with the saw blade. KICKBACK could cause the saw to jump backwards. (See "Causes and Operator Prevention of Kickback")

Do not reach underneath the work while blade is rotating. The guard can not protect you from the blade below the work. Don't attempt to remove cut material when blade is moving.

CAUTION: Blades coast after turn off.

2.Check lower guard for proper closing before each use. Do not operate saw if lower guard does not move freely and close instantly. Never clamp or tie the lower guard into the open position. If saw is accidentally dropped, lower guard may be bent. Raise the lower guard with the Retracting Handle and make sure it moves freely and does not touch the blade or any other part, in all angles and depths of cut.

3.Check the operation and condition of the lower guard spring. If the guard and the spring are not operating properly, they must be serviced before use. Lower guard may operate sluggishly due to damaged parts gummy deposits, or a buildup of debris.

4.Lower guard should be retracted manually only for special cuts such as "Pocket Cuts" and "Compound Cuts." Raise lower guard by Retracting Handle. As soon as blade enters the material, lower guard must be released. For all other sawing, the lower guard should operate automatically.

5.Always observe that the lower guard is covering the blade before placing saw down on bench or floor. An unprotected, coasting blade will cause the saw to walk backwards, cutting whatever is in its path. Be aware of the time it takes for the blade to stop after switch is released.

6.NEVER hold piece being cut in your hands or across your leg. It is important to support the work properly to minimize body exposure, blade binding, or loss of control.

7.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will also make exposed metal parts of the tool "live" and shock the operator.

8.When ripping always use a rip fence or straight edge guide. This improves the accuracy of cut and reduces the chance for blade binding.

9.Always use blades with correct size and shape (diamond vs. round) arbor holes. Blades that do not match the mounting hardware of the saw will run eccentrically, causing loss of control.

IO.Never use damaged or incorrect blade washers or bolts. The blade washers and bolt were specially designed for your saw, for optimum performance and safety or operation.

51778 specifications

The Makita 51778 is a robust and highly regarded power tool that has garnered attention among professionals and DIY enthusiasts alike. Known for its reliability and performance, this tool is an essential addition to any workshop or job site.

One of the standout features of the Makita 51778 is its powerful motor. Equipped with a high-performance electric motor, the unit provides a consistent output, ensuring efficient operation even under heavy loads. This means that users can tackle a variety of applications with confidence, from cutting to drilling and fastening tasks.

The design of the Makita 51778 prioritizes user comfort and safety. It features an ergonomic handle that offers a secure grip, minimizing fatigue during prolonged use. Additionally, the tool incorporates advanced safety features, including a trigger lock and an adjustable speed control, allowing users to work effectively while maintaining safety standards.

Another key characteristic is the tool’s versatility. The Makita 51778 is designed to accommodate various attachments, making it suitable for a wide range of tasks. This adaptability increases its appeal to users who require a multipurpose tool that can handle different materials and applications, whether in woodworking, metalworking, or construction.

The technology integrated into the Makita 51778 enhances its efficiency and performance. For instance, it includes a built-in LED light that illuminates the work area, providing better visibility in dimly lit spaces. This feature is particularly valuable for detailed work, adding to the overall user experience.

Durability is another significant aspect of the Makita 51778. Constructed with high-quality materials, this tool withstands the rigors of daily use. Its robust build ensures that it can handle tough conditions while maintaining consistent performance over time.

Overall, the Makita 51778 stands out with its blend of power, versatility, and ergonomic design. With advanced safety features and innovative technology, it appeals to both seasoned professionals and DIY enthusiasts looking to embark on their next project with confidence. Whether you're drilling into wood or metal, the Makita 51778 is engineered to deliver outstanding results, making it a valuable tool in any arsenal.