Panasonic WR-XS3P operating instructions Work Flow, Before Installation

Page 11

INSTALLATION

Work Flow

System Configuration

Decide what kind of system to form. Determine the num- ber of the external devices, the connection form, and the mode (p. 14 Unit Modes and Signal Flow).

d

Connections

Connect the components to the unit.

d

Settings

Configure the following settings:

Modes (pp. 14 to 17)

Input line assignment (if using the SUB OUT jack) (p. 18)

Output line assignment to MULTI IN/LINE IN.(p. 19)

d

Sticking a Label (p. 26)

Stick the supplied label on each component.

d

Adjusting the Input and Output Levels (pp. 29 to 31)

Adjust the input and output levels with the knobs on the front panel.

d

Attaching/detaching the acrylic cover (p. 28)

Attach the acrylic cover on the unit front panel to prevent wrong operation.

Before Installation

Caution:

Contact your dealer for installing the unit.

Be sure to toggle the power off and unplug the unit from the receptacle before installation. Follow the safety instructions.

Power Connection

Connect the power cord by any of the following methods, making sure to provide a breaking device in each case.

(1)Connect the power cord to the power control unit.

(2)Install the unit near a receptacle and connect the power cord to the receptacle via a breaking device. The breaking device should be installed near an operator.

(3)Connect the power cord to a circuit breaker in a panel board that has a contact distance of 3.0 mm or more. Use a circuit breaker that will interrupt each circuit of the main power supply (except a ground-protective conductor).

Installation Place

Install the unit out of direct sunlight and away from out- lets of heated air. Installation in a humid, dusty or shaky place may cause trouble.

Keep a distance between this unit and a transformer, dimmer, image device, CRT monitor, etc. as much as possible. Failure to do this may cause induction noise.

Rack Mounting

Keep the temperature in the rack below 45 °C . Failure to do this may cause damage to internal components.

Grounding the Unit

Ground the unit by the grounding terminal at the rear side. If the devices are connected in unbalanced connections, synchronize each grounding potential as follows:

Synchronize the power supply phases.

Synchronize the power supply lines.

Connect each device's grounding terminal or chassis with a thick grounding wire of each device.

Failure to do this may cause induction noise.

Note: If the unit is placed more than 10 m away from other external devices, grounding the unit near an unbal- anced external device is recommended.

Condenser Microphone

11

• When using a condenser microphone, connect it to an external device.

• Do not connect external devices supplying phantom power, as it may damage the unit.

Image 11
Contents Operating Instructions WR-XS3 Serial No Important Safety Instructions Contents Preface FeaturesPrecautions Front View Major Operating Controls and Their FunctionsRear View 2AC inlet socket AC 1Mono input connectors Mono Input 13Grounding screw Signal GND 0Stereo input jacks Stereo Input L/R 1Work Flow InstallationBefore Installation Items to prepare Mounting into the RackRack Tip-ring-sleeve TRS phone plug XLR connector XLR3-12 typeCable Information Pin plugMode Setup ProceduresUnit Modes and Signal Flow Mono amplification DIP switch settingOFF Internal switch setting is necessary DIP switch setting Input Line Setting for SUB OutputSuitable levels for the Multi in knob Output Line Setting for Multi IN/LINEAssign button setting Jack Assign button settingTo adjust the output levels Connection Examples Example 1 Home Party ModeMono REC OUT Example 2 Presentation Room ModeExample 3 Shop Mode Recorder Connections Using a Recording-only and a Playback-only DecksWhen Using a Recording-only and a Playback-only Decks When Recording and Playing Back With One DeckRecording and Playback with One Deck To output either mono or stereo signal through REC OUTLabel Where to Stick LabelsSticking Labels Indication of Input Line Assigned to SUB OUT ATTACHING/DETACHING the Acrylic Cover Multi in knob is adjustableMulti in knob is not adjustable Basic Operation OperationsMONO1 Input Level AdjustmentUsing CD/MD Player through Line Block MODE1 Mode Mode Level Diagram Output TroubleshootingInput Circuit SpecificationsStandard Accessories Basic SpecificationsPanasonic Sales Company

WR-XS3P specifications

The Panasonic WR-XS3P is a cutting-edge wearable technology designed to enhance the way users interact with their environments while promoting health and wellness. At the forefront of its features, this smartwatch combines advanced health monitoring capabilities with practical smart technology, making it a valuable companion for fitness enthusiasts and tech-savvy individuals alike.

One of the standout features of the WR-XS3P is its comprehensive health monitoring system. Equipped with a state-of-the-art heart rate sensor, the device provides real-time heart rate tracking to help users optimize their workouts and overall health. Additionally, the smartwatch includes an advanced sleep tracking feature, which allows users to monitor their sleep patterns and gain insights into their sleep quality, enabling them to make informed lifestyle choices.

The WR-XS3P also boasts built-in GPS functionality, allowing users to track their outdoor activities without needing to carry a phone. Whether running, cycling, or hiking, this feature provides accurate distance and pace measurements, giving users the data they need to improve their performance. Coupled with its companion smartphone app, users can analyze their activity history and set personalized goals for better health management.

In terms of connectivity, the Panasonic WR-XS3P is designed to integrate seamlessly with smartphones, offering notifications for calls, messages, and social media alerts directly on the wrist. This functionality empowers users to stay connected while keeping their mobile devices tucked away, promoting a more focused lifestyle.

The smartwatch’s sleek and modern design ensures that it remains stylish and functional. It features a high-resolution display that provides clear visibility in various lighting conditions, alongside customizable watch faces to suit individual preferences. Additionally, its durable construction ensures that it can withstand daily wear, making it an ideal choice for active users.

Battery life is another strong suit of the WR-XS3P, with the device offering several days of use on a single charge. This longevity makes it a reliable companion for both everyday tasks and intensive workout sessions.

In conclusion, the Panasonic WR-XS3P is more than just a smartwatch; it is a comprehensive health and activity tracker equipped with modern technology that caters to the needs of today’s consumers. With its health monitoring features, built-in GPS, seamless connectivity, stylish design, and impressive battery life, the WR-XS3P stands out as a top choice for anyone looking to elevate their fitness and tech experience.