Panasonic WR-XS3P Standard Accessories, Basic Specifications, Input Circuit, Output Circuit

SPECIFICATIONS

●Basic Specifications

Power supply	120 V AC, 60 Hz or 220 V to 240 V AC, 50 Hz*
Power consumption	10 W
Temperature range	0 °C - +45 °C (32 °F - 113 °F)
Dimensions	480 mm (W) x 44 mm (H) x 250 mm (D) [16-15/16” (W) 1-3/4” (D) x 9-7/8”] (when shipped,
	excluding projections such as knobs)
Weight	Approx. 3.4 kg (7.5 lbs.)
Frequency response	20 Hz to 20 kHz +0 dB/–0.5 dB (stereo input)
	300 Hz to 20 kHz +0 dB/–0.5 dB (mono input, sensitivity + 60 dBu)
High-pass filter	20 Hz to 20 kHz (included in all mono inputs)
Total harmonic distortion	0.1 % or less (at mono input)
Input conversion noise	–126 dB or less (source impedance 150 Ω or less, audio band 22.4 Hz - 22.4 kHz)
Residual noise	–94 dB or less (status where the knobs of all volumes and fader levels are turned down as
	far as possible, audio band 22.4 Hz to 22.4 kHz)
Maximum input	+12.2 dB or more (stereo input)
	+10 dB or more (mono input, when microphone is selected)
Maximum output	+24 dB or more (main output, sub output)
Crosstalk	–80 dB or less, 1 kHz (between adjacent channels)
Common mode rejection ratio	70 dB or more, 1 kHz (mono input, at –60 dB of sensitivity)
Maximum voltage gain	11.8 dB or more (stereo input)
	64 dB or more, 1 kHz (mono input, when microphone is selected)

●Input Circuit

Mono inputs 1 to 4	–60 dBu, 10 kΩ , balanced, mono input, four circuits, XLR
Stereo inputs 1 to 4	–10 dBV (–7.8 dBu), 10 kΩ , unbalanced, stereo input (L/R), four circuits, pin
Multi input (mono)	–45 dBu, 10 kΩ , balanced, mono input, one circuit, XLR
Multi input (stereo)	–10 dBV, (–7.8 dBu), 10 kΩ , unbalanced, stereo input (L/R), one circuit, ø3.5 mm (1/8")
	stereo mini (front panel)
Sub input	+4 dBu, 10 kΩ , unbalanced, stereo input (L/R), one circuit, RCA

●Output Circuit

Stereo output	+4 dBu, 10 kΩ	, electronically balanced, stereo output (L/R), one circuit, TRS
Mono output	+4 dBu, 10 kΩ	, electronically balanced, mono output, one circuit, TRS
Sub output	+4 dBu, 10 kΩ	, electronically balanced, mono output, one circuit, TRS
Recording output	–10 dBV, 10 kΩ	, unbalanced, stereo output (L/R), one circuit, pin

* Power supply is not switchable but conformed to your area.

STANDARD ACCESSORIES

Rack mounting screws (M5 x 12)	4 pcs.
Rubber feet	4 pcs.
Acrylic cover	1 pc.
Acrylic cover mounting screws (M3 x 6)	2 pcs.
Acrylic cover mounting spacers	2 pcs.
Label	1 pc.
Operating Instructions (this book)	1 pc.
AC power cord	1 pc.
Guarantee (U.S.A. and Canada only)	1 pc.

38