OPERATING INSTRUCTIONS
Headgear Adjustment
TILT ADJUSTMENT
CROWN
ADJUSTMENT
RATCHET KNOB
PIN HOLES FOR
ADJUSTMENT
Head Size Adjustment: Headband tightness is adjusted by pushing in the ratchet knob and turning to adjust to desired comfort level. This knob is located at the back of the helmet. HEAD GEAR CROWN ADJUSTMENT is made by adjusting crown strap for vertical placement on the head and snap- ping the pin into the hole to lock securely in place.
Tilt: Tilt is adjusted on the left side of the helmet. TILT is adjusted by loos- ening outside tension knob and releasing the adjustment lever from its cur- rent location and moving it to another location. Retighten the outside tension knob when finished.
4