Quality and Reliability

A CLOSER LOOK

•Simple wire harnessing keeps connections to a minimum for greater reliability. Lead and harness strain reliefs on all control connections help ensure trouble-free performance.

•Engine Protection System includes automatic shutdown for low oil pressure or high engine temperature.

•Indicator light turns on for low oil pressure or high engine temperature. A second indicator light turns on if the engine battery charging system malfunctions.

•Circuit breaker protection on the battery ignition system provides added component protection.

•Environmental friendly engine! Engine has a closed breather system to keep the engine compartment and ground clean. This system eliminates oil mist from collecting inside the engine compartment, especially on surfaces that would lower engine cooling efficiency.

•Self-bleeding engine simplifies startup if your fuel tank runs dry.

•Perkins® engine camshaft is gear-driven. No timing belt maintenance.

•Printed circuit boards are environmentally-shielded using Lincoln’s engineered potting and protective frame trays.

•Dependability and long life aided by all-copper windings in rotor and stator with high quality insulation.

•Standard stainless steel roof, side panels and engine-access door deliver added protection, durability and corrosion-resistance. Eliminates the need to paint or replace rusting panels.

•Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards.

•Three-Year Lincoln Warranty on welder. (Engine is warranted separately by the manufacturer.)

MACHINE SPECIFICATIONS

Product

Name

Ordering

Information

	CC/Pipe-Rated DC Output(1)	CV Rated Output(1)
Description	Current/Voltage/Duty Cycle	Current/Voltage/Duty Cycle AC Power(3)(4)

Dimensions (6)

H x W x L

inches (mm)

Weight lbs. (kg)

Vantage® 400

K2410-2

400 Amp DC Welder with

Engine Gauges

19,000 Watts Peak

17,000 Watts

Continuous AC Power

3-Phase

12,000 Watts Peak

11,000 Watts

Continuous AC Power

1-Phase

DC Constant Current

400A/36V/100%

450A/32V/100%

30-500 Amps

DC Pipe Current 300A/32V/100% 40-300A

Touch-Start TIG® Range

250A/30V/100%

20-250 Amps

Single Dial

Continuous Control

60V DC Max OCV

@1880 RPM

DC Constant Voltage(2)

400A/36V/100%

450A/32V/100%

14-36V

Single Dial

Continuous Control

Wire Feeder Power

120V/60Hz

42V/60Hz

19,000 Peak Watts, 60 Hz

Two 120V

Duplex GFCI

Receptacles

20A Per Duplex

40A Total (5)

1-Phase Full KVA Receptacle 46A@240V 46A@120V Each Branch Circuit(5)

3-Phase Full KVA Receptacle 41A@240V

35.9x 25.3 x 60.0

(913 x 642 x 1524)

1230

(559)

(1)High Altitude: For maximum rating, derate the output 2.5% to 3.5% for every 1,000 ft. (300 m). High Temperature: For maximum rating, derate 2 volts for every 18°F (10°C) above 104°F (40°C).

(2)DC Constant Voltage capability provides convenience and added safety when welding in electrically hazardous conditions.

(3)When welding, available auxiliary power will be reduced. Output voltage is within +/- 10% at all loads up to rated capacity.

(4)120V will operate either 60Hz or 50/60 Hz power tools, lights, etc.

(5)Circuits cannot be wired in parallel to operate the same device.

(6)Height is to top of case. Add 7.4 in. (187mm) to top of exhaust elbow.

ENGINE SPECIFICATIONS

Product

Name

Perkins® 404D-22 (7) EPA Tier 4i

Description

4 Cylinder, 4 Cycle

Water-Cooled Diesel Engine,

12V Electric Start,

Dry Type Air Cleaner, Fuel Filter with Water Separator

Horsepower &

Displacement

32.7HP@1800 RPM

136 cu. in.

(2.2 ltrs)

Capacities

FUEL:

15 gals (57 ltrs)

OIL:

8.5 qts (8.0 ltrs)

RADIATOR COOLANT: 8.0 qts (7.6 ltrs)

Operating		Fuel
Speeds		Consumption
400A	Load	1.2 Gal/Hr
400A	Load	1.2 Gal/Hr
1800	RPM	4.4 Ltr/Hr

High Idle		0.4 Gal/Hr
1880	RPM	1.5 Ltr/Hr

Low Idle		0.3 Gal/Hr
1400	RPM	1.1 Ltr/Hr

(7)Perkins® warranty is 2 years/2,000 hours, all non-electric components, 3 years major non-electric components. See warranty for details.

Vantage® 400

[4]	www.lincolnelectric.com