Makita 2708 Featherboards, Use of featherboard, Rabbeting, How to perform rabbeting

Page 16

Featherboards

A "featherboard" or "fingerboard" is a jig made from a board cut off a t an angle of 60 degrees. A series of parallel cuts is made part way through the board. Board should be

astraight piece with no knots or cracks (see photo). Featherboards should be used for any operation in which workpiece is not sawed all the way through (and the saw blade guard is therefore removed.).

Hold the featherboard as a sort of "spring stick" horizontal hold down to press the work firmly against the fence during the pass.

Use of featherboard

1. Switch off tool before operation.

"C clamps'

Feafherboard

 

 

2.Set featherboard with clamps so as to hold stock firmly against workpiece. Be sure of positive attachment.

3."Fingers" prevent work from being thrown back. Perform a trial to be sure they will stop a kickback.

Do not use featherboards for non-thru- sawing operations with which the miter gauge is employed. Re-install blade guard whenever the featherboard work is finished.

Rabbeting

Rabbeting i s the cutting away of a section from the corner of the workpiece. It can be done across the end or the entire length of the stock.

The blade guard should be removed to perform rabbet cuts which do not go all the way through the workpiece.

How to perform rabbeting

1.Remove blade guard.

2.Attach auxiliary fence to rip fence for cuts that run the length of the stock. Facing should be as high as the workpiece is wide. Adjust fence and blade to desired dimen- sions.

3.First cut: Hold board flat on table as in ordinary ripping.

4.Second cut: Set workpiece on i t s edge. (Use featherboards, push stick, push block and so on, using precautions, safety rules and guidelines for ripping or related work.)

5.For end-type rabbeting, if the work- piece i s less than 10-1/2" wide, rest the wood flat on the table against the miter gauge (with wood facing). The rip fence

should not be used.

6.After rabbeting is completed, immedi- ately re-installthe blade guard as before.

Rabett

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Table Saw General Safety Precautions Total Length of Cord in Feet Ampere Rating Grounding INSTRUCTI0NS Additional Safety Rules for Table SAW Assembly Procedure Installing SAW BladeSpreader installing location is factory- adjusted Installing Blade GuardInstallation Cutting Depth AdjustmentRIP Fence Adjustment Stopper AdjustmentFor Bevel Cuts Adjusting for Zero Setting Work Helpers Push StickAuxiliary Fence Push BlockWood Facing Rip Fence Auxiliary Wood Facing Miter Gauge Featherboard Miter GaugePage Ripping How to perform rabbeting FeatherboardsUse of featherboard RabbetingMaintenance Lubr Icat ION CleaningTool Storage Pocket Accessories Table SAW Stand Part NoHolder SET Components SUB-TABLE SETChisel tooth combination saw blade Warbide-tipped saw bladeRip fence Wrench HWrenchInside cutters Diameter, 118 thick Page Page Page Table SAW Page Jan.-2888 US 9MAKITA Limitedone Year Warranty

2708 specifications

The Makita 2708 is a powerful and reliable table saw designed for professional woodworkers and construction professionals seeking precision and efficiency in their cutting tasks. One of the standout features of the Makita 2708 is its robust 15-amp motor, which delivers an impressive no-load speed of 4,800 revolutions per minute. This high-speed performance ensures clean, accurate cuts through a variety of materials, including hardwood, plywood, and MDF.

The saw has a cutting capacity of 3-5/8 inches at 90 degrees and can bevel cut up to 45 degrees, providing versatility for various applications. The adjustable aluminum table expands the work surface area, while the direct-drive motor system minimizes vibration, enhancing user control and safety during operation.

A significant highlight of the Makita 2708 is its precision-engineered blade guard system, which promotes safety without compromising visibility. The clear guard allows users to see the blade in action, enhancing checklist safety procedures. Moreover, the saw features an easy-to-use blade elevation and tilt mechanism, making adjustments quick and seamless.

Portability is another essential aspect of the Makita 2708. It is equipped with built-in wheels and a compact design, allowing for easy transport to job sites or around the workshop. Additionally, the on-board storage for the miter gauge, rip fence, and wrenches ensures that all essential components are organized and accessible.

The saw incorporates advanced technologies that improve its functionality. The soft start feature reduces the torque during startup, preventing sudden movements that could affect the operator's control over the saw. Additionally, the overload protection system safeguards the motor from damage during heavy usage, ensuring longevity.

Users appreciate the Makita 2708 for its reliability, precision, and ease of use. Whether it's for rip cuts, cross cuts, or mitering, this table saw is engineered to deliver high-quality results consistently. In conclusion, the Makita 2708 stands as an excellent choice for professionals looking for a robust table saw that combines power, safety, and efficiency, catering to the demanding needs of woodworking and construction tasks.
Top Page Image Contents