Turn on the unit, Select Yes | Panasonic SC-PT670, SC-PT673 specification

step 6 [PT670] SMART SETUP

The Smart setup screen assists you in making necessary settings.

Started		Preparation
Started		≥To change your TV’s video input mode, refer
		Turn on your TV and select the appropriate
		video input mode (e.g. VIDEO 1, AV 1, HDMI,
		etc.) to suit the connections to this unit.
Getting		to its operating instructions.
Getting		≥This remote control can perform some basic
		TV operations (B 38).
Start Guide	DVD	DVD
Quick	DVD

SMART SETUP

Smart setup settings

≥Language

Select the language used on menu screen.

≥TV aspect

Select the aspect to suit your TV.

≥Speaker check

Listen to speaker output to confirm speaker connections.

≥Auto speaker setup

Adjust the speaker output level automatically. (B below)

≥Speaker output

Make surround sound setting for speaker output.

≥TV audio

Select the audio input connection from your TV. For AUX connection (B 9): Select “AUX”.

For OPTICAL IN connection (B 9): Select “DIGITAL IN”.

This will be the TV audio setting for VIERA Link “HDAVI Control”. (B 24)

[Note]

≥If this unit is connected to a “HDAVI Control 3 or later” compatible TV via HDMI cable, the menu language and TV aspect information will be retrieved via VIERA Link.

≥If this unit is connected to a “HDAVI Control 2” compatible TV via HDMI cable, the menu language information will be retrieved via VIERA Link.

≥Settings in the Smart setup can also be changed in the player settings [e.g. language, TV aspect, speaker level and TV audio (B 28)].

∫Adjusting the speaker output level automatically:

Auto speaker setup

The speaker level settings can be optimized to accommodate your room’s listening conditions so that you can enjoy the ideal surround sound experience.

Keep as quiet as possible during the Auto speaker setup. Loud voices, air-conditioning noise, or excessive wind may lead to incorrect settings. The speakers output loud test signals during setup.

≥Place the Auto speaker setup microphone at actual seating position. (At ear level when seated.)

≥The test signal is output from each speaker.

RQTX0210

1
2	DVD

3 SMART SETUP

(Main unit only)

Turn on the unit.

≥When the Smart setup screen appears automatically, skip step 2 and 3.

Select “DVD/CD”.

Show the Smart setup.

e.g.

Smart setup

Would you like to start smart setup?

Yes

SET

RETURN

Select “Yes”.

Follow the messages and make the settings.

(B right, Smart setup settings)

Finish Smart setup.

SETUP MIC

[Note]

Auto speaker setup can be activated through Smart setup only.