Wilton 4210 manual Adjusting Platen Housing Position, Adjusting the Sander Tables, Disc Table

Page 10

10

Adjusting Platen Housing Position

The sanding belt can be operated with the platen housing horizontal, vertical, or at any angle in between. Change position of the platen housing as follows:

WARNING: DISCONNECT ELECTRICAL POWER TO THE MACHINE BEFORE PERFORMING ANY MAINTENANCE.

1.Disconnect electrical power.

2.Remove four screws (52) and pulley cover (12).

3.Using an open end wrench, loosen two hex screws (13) (refer to Figure 7).

4.Move the platen housing to the desired position. When the platen housing is to be placed in the horizontal position, lower the platen housing onto stop screw (28) on the machine base.

5.If the stop requires adjustment, loosen jam nut (29), adjust stop screw (28) to desired position, and tighten nut (29).

6.Tighten two hex screws (13).

7.Install pulley cover (12) and secure with four screws (52).

8.Start the machine to check operation.

Platen

ClampingHousing

Screws

Figure 7. Platen Housing Clamping Screws

Adjusting the Sander Tables

The belt and disc sander tables can be adjusted from 0 to 45 degrees to accommodate the work piece.

Disc Table

1.To change the disc table angle, loosen the knob on the left side of the table (refer to Figure 8).

2.Move the table to the desired angle.

3.Tighten the knob to secure the table.

Belt Table

Clamping Knob

Belt Table Angle Scale

(left underside of table)

Disc Table Angle Scale

Table Clamping Knob

Figure 8. Adjusting Sander Table Angle

Belt Table

1.To change the belt table angle, loosen the knob on the right side of the platen housing (refer to Figure 8).

2.Move the table to the desired angle.

3.Tighten the knob to secure the table.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Wilton Belt and Disc Sanding Machine Warranty Table of Contents General Specifications SpecificationsMachinery general safety warnings General Machinery CautionsWire sizes Safety Requirements for Abrasive Sanding MachinesGeneral Electrical Cautions Belt and Disc Sander Features IntroductionMounting Installation and SetupElectrical Connection Operation AdjustmentsAdjusting Belt Tracking ControlsDisc Table Adjusting Platen Housing PositionAdjusting the Sander Tables Belt TableLubrication MaintenanceCleaning Replacing the Sanding BeltReplacing the V-Belts Replacement of Motor Correcting motor rotation in single phase motors Wiring DataSingle phase electrical hook-up Circuit protectionConnecting Power for 3-phase Motors Schematic diagram for single phase motor with 4-wire cableTroubleshooting Fault Probable Cause RemedyReplacement Parts Page Exploded View Wilton Model 4210 Belt & Disc Sander Parts Listing Wilton Model 4210 Belt & Disc Sander Electrical Schematic Wiring DiagramPage Page WHM Tool Group

4210 specifications

The Wilton 4210 is a versatile and robust bench vise designed for a range of clamping and holding applications in workshops, garages, and professional environments. This vise is known for its exceptional strength and durability, making it a trusted tool among hobbyists and professionals alike.

One of the standout features of the Wilton 4210 is its construction. Made from high-quality ductile iron, this vise ensures a strong, resilient body that can withstand heavy use without bending or breaking. The vise's design also includes a precision-ground, hardened steel jaw, which provides superior grip and minimizes wear over time. The jaw opening can accommodate a wide variety of workpieces, up to 10 inches, making it suitable for numerous tasks, whether fitting, shaping, or securing materials.

In terms of technology, the Wilton 4210 incorporates a unique rapid-action feature that allows for quick adjustments. This technology enables users to easily switch between clamping and releasing positions, improving efficiency during work. The vise is equipped with a powerful screw mechanism that facilitates smooth operation, providing a stable and secure hold on items, even under heavy pressure.

Another characteristic that sets the Wilton 4210 apart is its swivel base. The base can rotate a full 360 degrees, allowing users to position their workpiece at any angle for optimal accessibility and convenience. This feature is particularly beneficial for more intricate or precise tasks, as it eliminates the need for constant repositioning of the workpiece.

Additionally, the Wilton 4210's ergonomic design enhances user comfort. The carefully crafted handle provides a secure grip, minimizing hand fatigue during extended use. Its heavy-duty construction also means that it is engineered to resist the wear and tear associated with regular use, promising a long lifespan.

In summary, the Wilton 4210 bench vise is an excellent choice for those seeking reliability and versatility in their tools. With its durable construction, advanced technologies, and user-friendly features, it continues to be a staple in both amateur and professional workshops. Whether tackling metalworking, woodworking, or various DIY tasks, the Wilton 4210 delivers unmatched performance and dependability.
Top Page Image Contents