Introduction Description, Specifications | Wilton PF3-EZ instruction

Introduction

This manual is provided by WMH Tool Group, Inc. covering the safe operation and maintenance procedures for a Model PF3-EZ Stock Feeder. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.

Description

The PF3-EZ Stock Feeder can be mounted to a table saw to safely and effectively feed workpieces into the blade. The Stock Feeder has a continuous duty motor and lubricated gearbox that transmit power through roller chain and sprockets to the feed rollers, providing superior positive feeding for all types of materials. Heavy-duty locking mechanisms secure the feeder in position. The roller system is “maintenance-friendly” allowing you to replace a single roller if necessary, instead of a complete set.

Specifications
Model number	PF3-EZ
Stock number (230V)	1790814K
Stock number (460V)	1790815K
Motor	TEFC, 3/4HP, 3Ph
Height with handle (in.)	31.5
Width (in.)	21.85
Length with handle and arm fully extended (in.)	51.5
Elevating Column diameter (in.)	2
Horizontal Arm diameter (in.)	2.3
Rollers (dia. x w) (in.)	4-3/4 x 1, polyurethane
Rotation	forward/reverse
Number of speeds	variable
Range of speeds (FPM)	6.5 to 66
Distance between rollers, center-to-center (in.)	5.93 to 5.31
Swing (deg.)	360
Vertical movement (in.)	8.33
Horizontal movement (in.)	29.33
Maximum height of rollers parallel to table top (in.)	7.47
Approximate shipping weight (lbs.)	180
Approximate net weight (lbs.)	170

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.