Milwaukee 2401-20 manual Assembly, Operation, Functional Description, Symbology, Specifications

Page 3

6.WARNING: Some dust created by power sanding, sawing, grinding, drill- ing, and other construction activities contains chemicals known to cause cancer, birth defects or other reproduc- tive harm. Some examples of these chemicals are:

•lead from lead-based paint

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically- treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ven- tilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

ASSEMBLY

WARNING

Recharge only with the charger specified for the battery. For spe- cific charging instructions, read the operator’s manual supplied with your charger and battery.

Inserting/Removing the Battery

OPERATION

WARNING

Always lock trigger or remove battery before changing or removing accessories. Only use accessories specifically recommended for this tool. Others may be hazardous.

WARNING

FUNCTIONAL DESCRIPTION

 

2

 

14

1

12

 

10

 

6

 

3

 

4

 

5

1.

Bit holder collar

2.

Clutch adjusting ring

3.

Fuel Gauge

4.

Control Switch

5.

Trigger

6.

LED

 

Symbology

 

Direct Current

 

Underwriters Laboratories, Inc.,

 

 

 

 

 

 

United States and Canada

 

No Load Revolutions

 

per Minute (RPM)

 

 

Specifications

Cat. No.

Volts

No Load

 

Capacities

DC

RPM

Drilling in Wood

Driving Screws

2401-20

12

0 - 500

1/2"

 

1/4"

 

 

 

 

 

 

Fig. 1

Release

buttons

To remove the battery, push in the release buttons and pull the battery pack away from the tool.

To insert the battery, slide the pack into the body of the tool. Make sure it latches securely into place.

Fuel Gauge

To determine the amount of charge left in the battery, pull the trigger. The Fuel Gauge will light up for 2-3 seconds.

To signal the end of charge, 1 light on the fuel gauge will flash for 2-3 seconds.

To reduce the risk of injury, wear safety goggles or glasses with side shields.

Installing Bits

Always remove the battery before inserting or removing bits. Select the proper style and size bit for the type of screw you are using.

1.To install the bit, press the bit into the socket until the collar snaps back and the bit is locked into place.

2.To remove the bit, pull out the collar, then pull out the bit.

NOTE: It is not necessary to hold the collar out when installing and removing bits. The first time the tool is used, it may be necessary to pull out the collar.

4

5

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Operators Manual Personal Safety Power Tool USE and CareWork Area Safety Electrical SafetyFunctional Description AssemblySymbology OperationApplications Repairs Maintenance Five Year Tool Limited WarrantyAccessories CleaningSécurité Individuelle Conserver CES InstructionsSécurité DU Lieu DE Travail Sécurité ÉlectriquePictographie EntretienRègles DE Sécurité Spécifiques Description FonctionnelleManiement Avertissement Montage DE Loutil AvertissementAccesoires Avertissement MaintenanceSeguridad Eléctrica Garantie Limitée DE L’OUTIL DE Cinq ANSGuarde Estas Instrucciones Seguridad EN EL Área DE TrabajoReglas Especificas DE Seguridad USO Y Cuidado DE LAS Herramientas EléctricasUSO Y Cuidado DE LAS Herramientas CON Batería MantenimientoEnsamblaje Advertencia Descripción FuncionalSimbología EspecificacionesApplicaciones Mantenimiento de la herramienta Mantenimiento Garantía Limitada DE Cinco Años AdvertenciaAccesorios Advertencia Limpieza800.729.3878 fax Canada Service MilwaukeeMilwaukee 800.729.3878

2401-20 specifications

Milwaukee 2401-20 represents a significant addition to Milwaukee's renowned line of power tools, specifically designed for professionals who demand durability and high performance in their equipment. This model, a cordless M12 Drill/Driver, exhibits a balance between compactness and power, making it a versatile asset for various tasks in different settings, such as construction sites and home improvement projects.

At the heart of the Milwaukee 2401-20 is its powerful brushless motor, which provides outstanding efficiency and runtime. The brushless technology enhances the tool's lifespan and reduces the need for maintenance, allowing professionals to focus on their work without worrying about tool performance degradation over time. With a maximum torque of up to 250 inch-pounds, this drill/driver can handle a wide range of fastening applications, from plastic and wood to metal, ensuring it can tackle everyday jobs efficiently.

One of the most impressive features of the Milwaukee 2401-20 is its compact design. Weighing in at only 2.2 pounds and measuring just 6.6 inches in length, it easily fits into tight spaces, making it ideal for overhead or cramped conditions where larger tools might struggle. This portability does not come at the cost of power, proving that Milwaukee has successfully combined size with performance.

Functionality is further enhanced with its variable speed settings, providing users with the flexibility to adjust from 0 to 1,600 RPM, allowing for precise control over the speed and torque output according to the specific application. An integrated LED light illuminates the work area, ensuring visibility even in dark or confined spaces, which is crucial for professional tradespeople who often work in varied environments.

Another standout characteristic of the Milwaukee 2401-20 is its compatibility with the M12 battery system. This system allows for seamless interchangeability with other M12 tools, making the drill/driver a part of a comprehensive, efficient toolkit. The battery also boasts a fuel gauge, providing users with real-time information about remaining power to prevent interruptions during critical tasks.

In summary, the Milwaukee 2401-20 combines a compact design, powerful performance, and advanced technology, making it an essential tool for both professionals and DIY enthusiasts. Its brushless motor, variable speed control, and compatibility with the M12 battery system make it a reliable choice that stands out in the crowded market of cordless power tools. Whether engaging in heavy-duty applications or simple home projects, this drill/driver delivers the power and precision needed to get the job done.
Top Page Image Contents