General Specifications

The Wilton 15-Inch Vari-Speed Drill Presses, Models A5816, A5818, A5836, and A5838 provide drilling speeds from 400 to 5,000 rpm. Simple handwheel adjustment sets the speeds with an LED speed display on the faceplate of the machine.

Wilton's 15-inch vari-speed drill press provides a solid base for drilling and offers a wide range of spindle speeds. The large quill provides greater accuracy. The large worktable provides the operator with room to work and ample support for the workpiece. The drill press has a 3-inch diameter column for head and table support. The 15-Inch Vari-Speed Drill Press is equipped with a standard table raiser.

Specifications

Model	A5816	A5818	A5836	A5838
	A3816	A3818	A3836	A3838
Type	Floor Model	Floor Model	Bench Model	Bench Model
Motor:
Motor Speed (rpm) ....	1,725 rpm	1,725 rpm	1,725 rpm	1,725 rpm
HP	1 HP	3 HP	1 HP	3 HP
Power Rating	1 Ph, 115/220V	3 Ph, 220/440V	1 Ph, 115/220V	3 Ph, 220/440V
Spindle speed (rpm)	400 to 5,000rpm	400 to 5,000 rpm	400 to 5,000 rpm	400 to 5,000rpm
Capacity:
Cast iron	up to 5/8-in	up to 5/8-in	up to 5/8-in	up to 5/8-in.
Steel	up to 1/2-in	up to 1/2-in	up to 1/2-in	up to 1/2-in.
Drills to center	15 in	15 in	15 in	15 in.
Quill diameter	2-1/4 in	2-1/4 in	2-1/4 in	2-1/4 in.
Quill travel	6 in	6 in	6 in	6 in.
Spindle taper	#2 MorseTaper	#2 MorseTaper	#2 MorseTaper	#2 MorseTaper
Dimensions:
Table (overall)	15-1/4 x 17-3/4 in. ...	15-1/4 x 17-3/4 in	15-1/4 x 17-3/4 in	15-1/4 x 17-3/4 in.
Table (working area) ..	12-1/2 x 14-1/2 in. ...	12-1/2 x 14-1/2 in	12-1/2 x 14-1/2 in	12-1/2 x 14-1/2 in.
T-slot	1/2-in	1/2-in	1/2-in	1/2-in.
Spindle to table	41 in	41 in	41 in	41 in.
Spindle to base	47-1/2 in	47-1/2 in	47-1/2 in	47-1/2 in.
Overall height	67-1/2 in	67-1/2 in.