GE 45603 manual Specifications

Page 13

Important Note: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device.

Compliance with IC Rules and Regulations

IC: 6924A-45602A3

Jasco Products Company

Model: 45603

This Class B digital device complies with Canadian ICES-003.

SPECIFICATIONS

Power 120VAC, 60Hz

Signal (Frequency) 908.42 MHz

Maximum load for both outlets 15 Amps, 1800W Resistive Maximum load for the Z-Wave controlled outlet: 600W Incandescent, ½ HP Motor or 1800W Resistive

Range: Up to 100 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module. Operating Temperature Range: 32-104° F (0-40° C)

For indoor use only.

Specifications subject to change without notice due to continuing product improvement

Z-Wave is a registered US trademark of Zensys A/S © 2007 JASCO Products Company

Image 13
Contents Fluorescent & Appliance Module Introduction There are no user serviceable parts in this unit Risk of Fire Risk of Electrical Shock Risk of Burns GE Z-Wave Network Wireless RangeThings to consider regarding RF range Type of Construction Key Features Basic Operation Remote ControlManual Control Advanced Operation Load Sensing Restoring Factory DefaultsOver-Current Protection Interoperability with Z-WaveDevicesWarranty FCC Specifications Page