Lincoln Electric 305G dimensions Plasma Cutting

RECOMMENDED OPTIONS

WIRE FEEDERS CONT.

Gun Receiver Bushing

(For LN-15)

For use with K126-2 Magnum 350

Innershield Gun.

Order K1500-1

Magnum® 300 MIG Gun

For .035-.045” (0.9-1.2 mm) gas- shielded wire with 15 ft. (4.5 m) cable.

LN-25

Order K1802-1

(includes Connector Kit)

LN-15

Order:

K470-2Magnum 300 MIG Gun

K466-10Connector Kit

Drive Roll and Guide Tube Kit

(for LN-25)

For .035-.040” (0.9-1.0 mm) solid steel wire

Order KP653-035S

Drive Roll and Wire Guide Kit

(for LN-15)

For .035" (0.9 mm) solid steel wire.

Order KP1696-035S

LN-23P Wire Feeder

Portable CV unit for Innershield pipe welding. Includes drive rolls and guide tubes. Requires K2393-1 or -2 Input Cable Assembly and Magnum® Innershield Gun.

Order K316L-2

Input Cable Assembly for LN-23P

8-socket to 14-pin control cable with lugged electrode cable for K316L-2 LN-23P Wire Feeder.

Order:

K2393-1 25 ft (7.6 m)

K2393-2 75 ft (22.9 m)

Magnum® 250 Innershield Gun

(for LN-23P)

For lighter weight and easier handling. Rated 250 amps, 60% duty cycle. For .068 - 5/64” (1.7 - 2.0

mm)Innershield wire and includes reduced speed switch. For pipe welding, a KP1909-1 62° gun tube is recommended.

Order K355-10

WIRE FEEDERS CONT.

62º Gun Tube for Pipe Welding

Recommended modification for

K355-X or K345-X guns with 90º gun tubes. Allows more natural positioning for out-of-position pipe welding. Compatible with K126-1, K126-2, K264-8 and K355-10. Current capacity up to 350 amps. Recommended diameters: .062 - 3/32” (1.6-2.8 mm).

Order KP1909-1

Magnum SG Spool Gun

Hand held semiautomatic wire feeder. Requires SG Control Module

Order K487-25

SG Control Module

The interface between the power source and the spool gun. Provides control of wire speed and gas flow. For use with a spool gun.

Order K488

Input Cable

(For SG Control Module)

For Lincoln engine power sources with 14-pin MS-type connection, separate 115V NEMA receptacles and output stud connections.

Order K691-10

PLASMA CUTTING

Pro-Cut® 55

Cuts metal using the AC generator power from the engine-driven welder. Maximum cut thickness is 9/16" (14 mm). Requires the K1816-1 Full-KVA Adapter Kit.

Order K1580-1

Full - KVA Adapter Kit

Provides convenient connection of Lincoln Electric equipment having a 240V AC 1-phase plug (NEMA 6- 50P) to the full-KVA receptacle on Lincoln engine-driven welders.

Order K1816-1

	Ranger® 305G
[7]	www.lincolnelectric.com