Lincoln Electric 305G dimensions Quality and Reliability, Key Controls

A CLOSER LOOK

Key Controls							1.	Hour Meter
19	18	17	16
							2.	Output Control Dial
							3.	Digital Weld Output Ammeter
1				15			4.	Weld Mode Switch
							5.	Arc Force & Inductance/ Pinch Control Dial
2							6.	Circuit Breakers
3						14	7.	120 Volt AC Receptacles (NEMA 5-20R)
							8.	Output Stud Covers
			13
							9.	Ground Stud
4					12		10.	120/240 Volt AC Full KVA Receptacle (NEMA 14-50R)
5							11.	6-Pin Remote Control & 14-Pin Feeder Connectors
							12	Wire Feeder Voltmeter Polarity Switch

1113. Welding Terminals Control Switch

6		14.		Digital Weld Output Voltmeter
7	10
			15.	Idler Control Switch

9	16.	Push-Button Start Switch
	17.	Engine Choke Control
8	18.	Run/Stop Switch
	19.	Electric Fuel Gauge

QUALITY AND RELIABILITY

•Printed circuit boards are environmentally-shielded using Lincoln's engineered potting and protective frame trays.

•Oil dip stick, filters, spark plugs, etc. are easily accessed with left, right and top engine doors. Left and right doors are removable for service.

•Adjust exhaust direction with top-mounted 360º rotatable exhaust muffler. Muffler made from aluminized steel for longer life.

•Attractive red and black powder paint finish offers increased durability with added protection from rust and corrosion. Also ultraviolet resistant to better retain color and gloss.

•Longer engine life, reduced noise emissions and greater fuel economy with automatic engine idler.

•Conveniently located engine maintenance label under top engine door.

•Engine hour meter for scheduled maintenance.

•Automatic engine shutdown protection for low oil pressure.

•Reliable start-up with Group 58 battery with 435 cold cranking amps.

•Optional K1690-1 GFCI (Ground Fault Circuit Interrupter) Kit available for additional protection from electrical shock.

•Dependability and long life aided by all-copper windings in rotor and stator with high quality insulation.

•Approved by Canadian Standards Association (CSA).

•Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards.

•Three year Lincoln warranty (parts and labor) on welder. (Engine is warranted separately by the manufacturer.)

Make the Ranger 305G your portable welding station - General stick and downhill pipe, Touch-Start™ TIG, MIG, Flux-cored and AC generator to power lights, grinders or other power tools.

	Ranger® 305G
[3]	www.lincolnelectric.com