Features, Key Controls | Lincoln Electric 300 specs

A CLOSER LOOK

FEATURES

Single-side engine access with lockable sliding door.

Fuel, Oil Pressure and Engine Temperature gauges help you monitor performance.

Output switches to remote mode when remote device is connected.

•Simple Controls – Keeps training time to a minimum. The flip-down control panel door keeps less frequently used dials out of the way. Scratch-resistant Lexan® nameplate.

•Digital meters for amps and volts output make it easy to precisely set your procedures.

•Large 15 gallon (57 liter) fuel tank provides run time for an extended day–13 hours of welding at 300A/32V/100% duty cycle output, or 37 hours at high idle.

•Kilowatts available for Multi-Weld™350 use: 4.8 KW @ 60 VDC, 7.0 KW @ 58 VDC.

Convenient battery tray below control panel.

Latched and lockable radiator cap cover.

Handy oil drain valve and tube makes oil changes neat.

•Two Great Engine Choices – Kubota® V1505 or Deutz® D2008L4. Both are 22 horsepower water-cooled 4 cylinder diesel engines. Both engines also have an automatic idler for greater fuel economy and reduced noise.

•Engine hour meter for scheduled maintenance.

•LN-25 PRO Arcoss-the-Arc wire feeder is a recommended option.

•14-pin connector for Lincoln wire feeders with control cables: LF-72, LF-74, LN-7, LN-8, LN-15, LN23P,LN-25, and LN-742. Also compatible with Magnum® SG Spool Gun System.

•Two Vantage® 300 units can be paralleled in the CC-Stick Mode to increase output.

Key Controls

1 23

1.Glow Plug Button

2.Weld Mode Selector Switch

3.Run/Stop Switch

4.Hour Meter

5.Start Pushbutton

6.Engine Idler Switch

227. Fuel Level, Engine Temperature and Oil Pressure Gauges

218. Engine Protection Light

9. Engine Battery Charging Light

2010. Circuit Breakers, except 240 VAC 3-Phase

11. 120 VAC GFCI Receptacles

12. 120/240 VAC Full-KVA 1-Phase Receptacle

1813. 240 VAC Full-KVA 3-Phase Receptacle

14. 240 VAC 3-Phase Circuit Breaker

1715. Covered Weld Output Terminals + and -

16.Ground Stud

17.14-Pin Wire Feeder Connector

18.6-Pin Remote Control Connector

19.Arc Force & Inductance/Pinch Control Dial

20.Welding Terminals Control Switch

1621. Wire Feeder Voltmeter Polarity Switch

22. Digital Amps and Volts Output Meters

1523. Output Control Dial

Note: Control panel door not shown.

Vantage® 300

[3]	www.lincolnelectric.com