Quality and Reliability

(1) High Altitude: For maximum rating, derate the output 2.5% to 3.5% for every 1,000 ft. (300 m). High Temperature: For maximum rating, derate 2 volts for every 18°F (10°C) above 104°F (40°C).

(2) DC Constant Voltage capability provides convenience and added safety when welding in electrically hazardous conditions.

(3) When welding, available auxiliary power will be reduced. Output voltage is within +/- 10% at all loads up to rated capacity.

(4) 120V will operate either 60Hz or 50/60 Hz power tools, lights, etc.

(5) Circuits cannot be wired in parallel to operate the same device. (6) Height is to top of case. Add 5 in. (127 mm) to top of exhaust elbow for Kubota® and for Deutz®.

ENGINE SPECIFICATIONS

A CLOSER LOOK

•Simple wire harnessing keeps connections to a minimum for greater reliability. Lead and harness strain reliefs on all control connections help ensure trouble-free performance.

•Engine Protection System includes automatic shutdown for low oil pressure or high engine temperature.

•Indicator light turns on for low oil pressure or high engine temperature. A second indicator light turns on if the engine battery charging system malfunctions.

•Circuit breaker protection on the battery ignition system provides added component protection.

•Environmental friendly engine! Engine has a closed breather system to keep the engine compartment and ground clean. This system eliminates oil mist from collecting inside the engine compartment, especially on surfaces that would lower engine cooling efficiency.

•Self-bleeding engine simplifies startup if your fuel tank runs dry.

•Kubota® and Deutz® engine camshafts are gear-driven. No timing belt maintenance.

•Printed circuit boards are environmentally- shielded using Lincoln’s engineered potting and protective frame trays.

•Dependability and long life aided by all-copper windings in rotor and stator with high quality insulation.

•Standard stainless steel roof, side panels and engine-access door deliver added protection, durability and corrosion-resistance. Eliminates the need to paint or replace rusting panels.

•Approved by the Canadian Standards Association (CSA).

•Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards.

•Three-Year Lincoln Warranty (parts and labor) on welder. (Engine is warranted separately by the manufacturer.)

MACHINE SPECIFICATIONS

Product		Ordering
Name		Information
Name		Information

	CC/Pipe-Rated DC Output(1)	CV Rated Output(1)
Description	Current/Voltage/Duty Cycle	Current/Voltage/Duty Cycle AC Power(3)(4)

Dimensions (6)

H x W x L

inches (mm)

Weight lbs. (kg)

Vantage® 300	K2409-2
Kubota®

Vantage® 300	K2499-2
Deutz®

300 Amp DC Welder with

Engine Gauges

12,500 Watts Peak

11,000 Watts

Continuous AC Power

3-Phase

11,500 Watts Peak

10,000 Watts

Continuous AC Power

1-Phase

DC Constant Current

300A/32V/100%

350A/28V/100%

30-400 Amps

DC Pipe Current 300A/32V/100% 40-300A

Touch-Start TIG® Range

250A/30V/100%

20-250 Amps

Single Dial

Continuous Control

60V DC Max OCV

@1890 RPM

DC Constant Voltage(2)

300A/32V/100%

350A/28V/100%

14-32V

Single Dial

Continuous Control

Wire Feeder Power

120V/60Hz

42V/60Hz

12,500 Peak Watts, 60 Hz

Two120V

DuplexGFCI

Receptacles

20A Per Duplex

40A Total (5)

1-Phase Full KVA Receptacle 42A@240V 42A@120V Each Branch Circuit(5)

3-Phase Full KVA Receptacle 27A@240V

35.9x 25.3 x 60.0 in (913 x 642 x 1524mm)

1035 lbs.

(469 kg)

1150 lbs

(522 kg)


Product		Horsepower &		Operating		Fuel
Name	Description	Displacement	Capacities	Speeds		Consumption

Kubota® V1505 (7)	4 Cylinder, 4 Cycle	22 HP@1800 RPM	FUEL:	300A	Load	1.2 Gal/Hr
	Water-Cooled Diesel Engine,		15 gals (57 ltrs)	1800	RPM	4.4 Ltr/Hr
	12V Electric Start,	91 cu in	OIL:	High Idle		0.4 Gal/Hr
	Dry Type Air Cleaner,	(1.5 ltrs)	6.4 qts (6.0 ltrs)	1890	RPM	1.5 Ltr/Hr
	Fuel Filter with Water Separator		RADIATOR COOLANT:	Low Idle		0.3 Gal/Hr
	EPA Tier 4i		7.2 qts (6.8 ltrs)	1350	RPM	1.1 Ltr/Hr

Deutz® D2008L4 (8)	4 Cylinder, 4 Cycle	24 HP@1800 RPM	FUEL:	300A	Load	1.2 Gal/Hr
	Water-Cooled Diesel Engine,		15 gals (57 ltrs)	1800	RPM	4.4 Ltr/Hr
	12V Electric Start,	95 cu in	OIL:	High Idle		0.5 Gal/Hr
	Dry Type Air Cleaner,	(1.6 ltrs)	7.8 qts (7.4 ltrs)	1800	RPM	1.8 Ltr/Hr
	Fuel Filter with Water Separator		RADIATOR COOLANT:	Low Idle		0.3 Gal/Hr
	EPA Tier 4i		7.9 qts (7.5 ltrs)	1400	RPM	1.3 Ltr/Hr

(7)Kubota® warranty is 2 years/2,000 hours for machines shipped within the U.S., Canada, Pacific Ocean region and Western Europe. Warranty is 1 year/1,000 hours for Central and South America, Asia, Africa and Middle East.

(8)Deutz® warranty is 2 years/2,000 hours for all components, 3 years/3,000 hours for major components.

Vantage® 300

[4]	www.lincolnelectric.com

A CLOSER LOOK