P 6/ 27
Repair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Armature, Motor bracket complete (cont.)
DISASSEMBLING
Fig. 9
Disassemble Switch lever, Lock off button, Compression spring 5, Compression spring 4 from Grip R. And remove Grip R from the machine by unscrewing M5x25 Pan head screw. In case of Models RP1800 and RP1801, refer to Fig. 11.
Compression spring 5 | Lock off button |
Grip R |
|
Grip R |
|
| Compression |
| spring 4 |
| Switch |
| lever |
| Switch |
M5x25 Pan Head screw |
|
Fig. 10 | Fig. 11 |
In case of Models RP1800F, RP1801F, RP2300FC and RP2301FC, | Remove Motor bracket together with |
disconnect Connector of Controller from LED circuit prior to | Armature from Motor housing by |
the step described in Fig. 11. | removing 5x35 Tapping screw (4pcs.) |
| 5x35 Tapping |
| screw (4pcs.) |
| Motor |
| bracket |
Connector of Controller | Armature |
|
Fig. 12
Retainer 1R041
Remove Retainer from Armature shaft by:
1) holding Armature using 1R041 and vise
2) turning counterclockwise with Wrench 41 or Hex socket