SPECIFICATIONS
Model | DS4000 | ||
|
|
| |
Capacity | Steel | 13 mm (1/2”) | |
|
| ||
Wood | 38 mm | ||
| |||
|
|
| |
No load speed (RPM) | 500/min. | ||
|
| ||
Overall length | 363 mm | ||
|
| ||
Net weight | 4.0 kg ( 8.8 lbs) | ||
|
|
| |
•Manufacturer reserves the right to change specifications without notice.
•Specifications may differ from country to country.
GENERAL SAFETY RULES |
(For All Tools)
WARNING:
Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite acci- dents.
2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3.Keep bystanders, children, and visitors away while operating a power tool. Distrac- tions can cause you to lose control.
Electrical Safety
4.Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordi- nances. Never remove the grounding prong or modify the plug in any way. Do not use any adaptor plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically mal- function or break down, grounding provides a low resistance path to carry electricity away from the user.
2