FUNCTIONAL DESCRIPTION
CAUTION:
•Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.
1
1. Switch trigger
003642 | Switch action |
CAUTION:
•Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released.
•Change the direction of rotation only when the tool comes to a complete stop. Changing it before the tool stops may damage the tool.
ASSEMBLY
The switch is reversible, providing either clockwise or coun- terclockwise rotation. To start the tool, simply pull the lower part of the switch trigger for clockwise or the upper part for counterclockwise. Release the switch trigger to stop.
CAUTION:
•Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.
003643 |
003644 |
1 |
1. Chuck key
Installing top grip (auxiliary handle)
Screw the top grip on the tool securely.
Installing or removing drill bit
To install the bit, place it in the chuck as far as it will go. Tighten the chuck by hand. Place the chuck key in each of the three holes and tighten clockwise. Be sure to tighten all three chuck holes evenly.
To remove the bit, turn the chuck key counterclockwise in just one hole, then loosen the chuck by hand.
After using the chuck key, be sure to return to the original position.
6