Makita AC310H dimensions Unloading valve

Repair

P 3/ 7

[2] REPLACING

[2]-3. Unloading valve

1)Loosen M8 Ring nut with Spanner 17, then remove Pipe 8 from Elbow 8-R1/4. (Fig. 6)

Fig. 6

	Pipe 8
Elbow 8-R1/4	M8 Ring nut

2)Loosen four M5x10 Pan head screws, then remove Front panel assembly from Frame complete. (Fig. 7)

Fig. 7

Frame complete

Front panel assy (RC1/4)

M5x10 Pan head screw

Spring washer 5

Flat washer 5

Pipe 8

3)Loosen two Ring nuts 6 with Spanner 13, then remove Pipe 6.

Loosen Screw and Nut (that are components of Switch assembly). Unloading valve can be removed. (Fig. 8)

Fig. 8

Switch assembly
	Ring nut 6
Pipe 6
	Screw
	Unloading valve
Ring nut 6 (2pcs.)	Nut