Repair
P 4/ 7
[2] REPLACING
[2]-4. Sheet ring H, Leaf spring H, Wearing H
DISASSEMBLING
1)After removing Side panel with Side panel cover, loosen two Ring nut 10 and remove Pipe 10. (Fig. 9)
Fig. 9
Pipe 10 |
Ring nut 10 (2pcs.) |
2)Loosen nine 4x18 Tapping screws, then separate Motor cover A complete from Motor cover C. (Fig. 10)
Fig. 10
Motor cover A complete |
Motor cover C |
4x18 Tapping screws (9pcs.) |
3)Lift up and slide Motor cover A complete along gray arrow direction so that the side of Cylinder head L faces the reverse of rib of Motor cover A complete. Then remove Motor housing A complete by moving along black arrow direction. (Fig. 11)
Fig. 11
side of Cylinder head L
rib of Motor cover A complete
The side of Cylinder head L faces the reverse of rib of Motor cover A complete